How to service the coolant reservoir on 2006 Ford Taurus?

Draining the cooling system must be the first step before serving the coolant reservoir. The first step involves removing the two upper degas bottle hoses then setting them aside after which the lower degas bottle hose must be disconnected followed by its placement aside. Unfasten both the bolt and nut holding the degas bottle then extract the degas bottle from the system. The installation requires tightening the bolt and nut to 10 Nm (89 inch lbs.) and following the reverse removal steps. The service requires filling and bleeding of the cooling system to finish the work.

OEM 2006 Ford Taurus Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir found

View related parts
2006 Ford Taurus Reservoir, Front
Part Number: 1F1Z-8A080-AA
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir, Front; Engine Coolant Reservoir; Coolant Reservoir
- Manufacturer Note: OHV
- Position: Front
- Base No.: 8A080
- Item Weight: 1.70 Pounds
- Item Dimensions: 14.8 x 9.3 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1F1Z-8A080-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2006 Ford Taurus Coolant Reservoir

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Taurus Coolant Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Taurus Coolant Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Taurus Coolant Reservoir Parts Questions & Experts Answers

Q: How to service the coolant reservoir on 2006 Ford Taurus?
A: Draining the cooling system must be the first step before serving the coolant reservoir. The first step involves removing the two upper degas bottle hoses then setting them aside after which the lower degas bottle hose must be disconnected followed by its placement aside. Unfasten both the bolt and nut holding the degas bottle then extract the degas bottle from the system. The installation requires tightening the bolt and nut to 10 Nm (89 inch lbs.) and following the reverse removal steps. The service requires filling and bleeding of the cooling system to finish the work.