FordParts
My Garage
My Account
Cart
OEM 2006 Lincoln LS Brake Disc
Disc Rotor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Discs found
2006 Lincoln LS Brake Rotor, Front Part Number: 2U2Z-1V125-HB
$71.81 MSRP: $108.32You Save: $36.51 (34%)Ships in 1 Business DayProduct Specifications- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Disc Brake Rotor; Rotor
- Position: Front
- Replaced by: 2U2Z-1V125-HC
- Replaces: 2U2Z-1V125-HA, BRRF-222, BRR-109, XW4Z-1125-AA
- Item Weight: 20.50 Pounds
- Item Dimensions: 2.6 x 12.5 x 13.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2U2Z-1V125-HB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln LS Rotor, Rear Part Number: 2U2Z-1V125-EB
$71.81 MSRP: $108.32You Save: $36.51 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Rotor Assembly; Disc Brake Rotor, Rear; Brake Rotor
- Position: Rear
- Replaces: 2U2Z-1V125-EA, BRRF-223, 1R8Z-2C026-AA, BRR-105
- Item Weight: 15.20 Pounds
- Item Dimensions: 2.3 x 12.5 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2U2Z-1V125-EB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln LS Brake Disc
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln LS Brake Disc available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln LS Brake Disc as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Lincoln LS Brake Disc Parts Q&A
- Q: How to service the front brake disc on 2006 Lincoln LS?A: Service of the front brake rotor starts with removing two bolts from the brake caliper anchor plate followed by discarding them before setting the plate to the side. Place a mark on both a wheel stud and brake disc lug hole so you can keep the lowest front brake disc runout when reassembling. Next, remove the brake disc. First clean the brake disc and hub thoroughly where using brake parts cleaner for installation. The hub flange requires a light application of high-temperature nickel anti-seize lubricant. You should install the brake disc while matching its marks to the wheel stud position. Install the brake caliper anchor plate and fasten two new bolts by tightening them to 103 Nm (76 ft. lbs.).