FordParts
My Garage
My Account
Cart
OEM 2006 Lincoln Mark LT Battery Cable
Car Battery Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Battery Cables found
2006 Lincoln Mark LT Cable Assembly Part Number: 4L3Z-14300-AAA
$1082.24 MSRP: $1874.00You Save: $791.76 (43%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable - Battery To Starter Motor; Battery Cable; Battery Cables; Cable
- Manufacturer Note: From Fuse box B+ Stud To Positive Battery Cable Post Terminal
- Replaces: 2L1Z-14300-AAA
- Base No.: 14300A
- Item Weight: 1.30 Pounds
- Item Dimensions: 12.2 x 3.0 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L3Z-14300-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Mark LT Battery Cable Part Number: 6L3Z-14300-BA
$112.07 MSRP: $184.40You Save: $72.33 (40%)Product Specifications- Other Name: Cable Assembly - Battery To Battery; Battery Cable Harness; Battery Cables; Positive Cable
- Replaces: 4L3Z-14300-BA
- Base No.: 14300B
- Item Weight: 6.70 Pounds
- Item Dimensions: 16.3 x 16.3 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L3Z-14300-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Mark LT Battery Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Mark LT Battery Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Mark LT Battery Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Lincoln Mark LT Battery Cable Parts Q&A
- Q: How to service and repair the battery cables on 2006 Lincoln Mark LT?A: Service and repair operations on battery cables should begin when the vehicle sits in neutral and rests on a hoist. First disconnect the battery then loosen the nut holding the starter solenoid positive cable terminal before relocating it and finally tighten the nut to 12 Nm (9 lb-ft). Tighten the nut for the starter solenoid wire terminal to 5 Nm (44 lb-in) before final installation. To install the starter motor ground cable terminal you should tighten it to 22 Nm (16 lb-ft). Remove the right-hand engine mount battery cable harness locator while disconnecting the nut to set aside the lower bracket after tightening it to 10 Nm (89 lb-in). The bolt must be removed to place the battery ground cable frame terminal and this connection should receive 30 Nm tightening force after reinstallation. The radiator fan shroud's battery cable harness locator should be detached while removing the nut connecting the generator harness terminal and the CJB cable terminal to the positive battery terminal and then retightening the nut to 9 Nm (80 lb-in). Before reinstallation you must pose the body terminal of the battery ground cable by removing its bolt then tighten it for 12 Nm (9 lb-ft). The technician disconnects and removes the battery cable assembly after separating the battery cable harness in-line electrical connector. The contributor should perform the installation by following the removal procedure in reverse order.