How to service and repair the evaporative emission canister purge valve on 2006 Lincoln Town Car?

The first procedure for servicing or repairing the evaporative emission canister purge valve requires separations of the battery ground cable. The next step is to remove both EVAP tube quick connect couplings after taking off the EVAP purge valve electrical connector. First identify the EVAP canister purge valve by depressing the lock tab and pulling it out from its bracket. The installation of the new valve requires performing the reverse procedure of removal. A leak test should be conducted on the system before initiating the evaporative emission repair verification drive cycle to verify proper system functionality.

OEM 2006 Lincoln Town Car Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Canister Purge Valves found

View related parts
2006 Lincoln Town Car Purge Valve
Part Number: 6W1Z-9C915-A
$119.13 MSRP: $189.16
You Save: $70.03 (38%)
ADD TO CART
Product Specifications
- Other Name: Valve Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Purge Solenoid
- Replaces: 5W1Z-9C915-AA
- Base No.: 9C915
- Item Weight: 1.30 Pounds
- Item Dimensions: 8.4 x 6.1 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-9C915-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln Town Car Submodels:
- Designer Series, Executive, Executive L, Protection Series, Signature, Signature L, Signature Limited | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2006 Lincoln Town Car Vent Control Solenoid
Part Number: 6F7Z-9F945-AA
Product Specifications
- Other Name: Solenoid Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Solenoid
- Replaces: 6C3Z-9F945-A
- Base No.: 9F945
- Item Weight: 0.90 Pounds
- Item Dimensions: 5.7 x 3.8 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F7Z-9F945-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln Town Car Submodels:
- Designer Series, Executive, Executive L, Protection Series, Signature, Signature L, Signature Limited | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2006 Lincoln Town Car Canister Purge Valve

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Town Car Canister Purge Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Town Car Canister Purge Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Lincoln Town Car Canister Purge Valve Parts Questions & Experts Answers

Q: How to service and repair the evaporative emission canister purge valve on 2006 Lincoln Town Car?
A: The first procedure for servicing or repairing the evaporative emission canister purge valve requires separations of the battery ground cable. The next step is to remove both EVAP tube quick connect couplings after taking off the EVAP purge valve electrical connector. First identify the EVAP canister purge valve by depressing the lock tab and pulling it out from its bracket. The installation of the new valve requires performing the reverse procedure of removal. A leak test should be conducted on the system before initiating the evaporative emission repair verification drive cycle to verify proper system functionality.