How to Service and Repair the Motor and Transmission Mount on 2006 Lincoln Town Car?

The procedure for servicing the transmission mount starts with removal of the transmission support crossmember and subsequent removal of the transmission support insulator. Install the system by performing the removal steps in reverse order and tighten all components to 80 Nm (59 ft.lbs.).

OEM 2006 Lincoln Town Car Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Motor And Transmission Mounts found

View related parts
2006 Lincoln Town Car Transmission Mount, Rear
Part Number: 3W1Z-6068-BA
$42.27 MSRP: $61.53
You Save: $19.26 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Auto Trans Mount, Rear; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount
- Manufacturer Note: Insulator & retainer, rear engine support
- Position: Rear
- Base No.: 6068
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.8 x 3.1 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W1Z-6068-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2006 Lincoln Town Car Front Mount, Passenger Side
Part Number: 3W1Z-6038-CB
$159.66 MSRP: $220.88
You Save: $61.22 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Bracket; Motor Mount
- Manufacturer Note: RH, front
- Position: Front Passenger Side
- Base No.: 6038
- Item Weight: 7.00 Pounds
- Item Dimensions: 9.2 x 8.2 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W1Z-6038-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2006 Lincoln Town Car Front Mount, Driver Side
Part Number: 3W1Z-6038-DA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount Bracket; Motor Mount
- Manufacturer Note: LH, front, use on vehicles built after late July 2002 with engine tags: 3G-804-AB, 3G-808-AB, 3G-112-AB, 3G-114-AB & 3G-116-AB., AFTER 7-29-02
- Position: Driver Side
- Base No.: 6038
- Item Weight: 6.20 Pounds
- Item Dimensions: 9.3 x 5.6 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W1Z-6038-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2006 Lincoln Town Car Motor And Transmission Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Town Car Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Town Car Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Lincoln Town Car Motor And Transmission Mount Parts Questions & Experts Answers

Q: How to Service and Repair the Motor and Transmission Mount on 2006 Lincoln Town Car?
A: The procedure for servicing the transmission mount starts with removal of the transmission support crossmember and subsequent removal of the transmission support insulator. Install the system by performing the removal steps in reverse order and tighten all components to 80 Nm (59 ft.lbs.).