FordParts
My Garage
My Account
Cart
OEM 2006 Lincoln Town Car Shift Cable
Transmission Shift Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Shift Cable found
2006 Lincoln Town Car Shift Control Cable Part Number: 6W1Z-7E395-A
$36.36 MSRP: $52.02You Save: $15.66 (31%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable Assembly - Selector Lever Control; Shift Interlock Cable; Automatic Transmission Shifter Cable; Cable
- Base No.: 7E395
- Item Weight: 2.20 Pounds
- Item Dimensions: 21.7 x 14.2 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-7E395-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Town Car Shift Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Town Car Shift Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Town Car Shift Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Lincoln Town Car Shift Cable Parts Q&A
- Q: How to adjust the front Shift Cable for the air suspension system on 2006 Lincoln Town Car?A: The first step to adjust the shift cable requires turning off power to the air suspension system because air spring changes without warning may cause the vehicle to shift during servicing thus threatening personal safety. When placing the gearshift lever in (D) position while the vehicle sits on a hoist in neutral, the technician should hang a 1.4 kg (3 lb.) weight. To connect the shift cable with the manual control lever, remove the retaining nut followed by moving the control lever to (D) position by pulling it forward until it stops before pushing it backward two detents to reach the (D) position. Install a nut on the shift cable to the manual control lever before tightening it to 30 Nm (22 ft. lbs.). You should remove the 1.4 kg (3 lb.) weight before moving the gearshift lever from one detent position to the next to validate correct transmission gear selection. You should verify that the engine starts correctly in P and N and the reversing lamps work when shifted to R. After making this adjustment test, recheck the system if either condition fails. Once the electrical power supply to the air suspension system is turned on, check the digital transmission range sensor and make required modifications before resuming power.