FordParts
My Garage
My Account
Cart
OEM 2006 Lincoln Zephyr A/C Expansion Valve
Air Conditioning Expansion Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 A/C Expansion Valve found
2006 Lincoln Zephyr Expansion Valve Part Number: 6E5Z-19849-AA
Product Specifications- Other Name: Valve Assembly - Evaporator Expansion; A/C Expansion Valve
- Manufacturer Note: includes o-ring
- Base No.: 19849
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.9 x 2.3 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-19849-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Zephyr A/C Expansion Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Zephyr A/C Expansion Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Zephyr A/C Expansion Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Lincoln Zephyr A/C Expansion Valve Parts Q&A
- Q: How to Service and Repair the A/C Expansion Valve on 2006 Lincoln Zephyr?A: On 3.0L vehicles, you need to take off the lower cowl panel grille before you can service and fix the A/C expansion valve. Remove the refrigerant from the system before disconnecting the A/C pressure transducer electrical connector and removing the wire harness from the A/C expansion valve stud. First, unscrew the A/C expansion valve fitting nut and remove the fitting, discarding its gasket seals. After putting everything back, you must fasten the fitting at 15 Nm (11 lb-ft) torque. Unscrew the two A/C expansion valve bolts and carefully take out the valve, discarding its sealing gaskets. Reassemble the system by reversing the installation process. Use fresh gasket seals and fill the refrigerant system with the needed amount of clean PAG oil. Afterward, charge the system with refrigerant while checking for any leaks. You need to replace the A/C desiccant cartridge physically only when the system shows signs of contamination that harm the compressor or damage the cartridge.