FordParts
My Garage
My Account
Cart
OEM 2006 Lincoln Zephyr Parking Brake Cable
Emergency Parking Brake Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Parking Brake Cable found
2006 Lincoln Zephyr Parking Brake Cable Part Number: AE5Z-2A815-E
$30.42 MSRP: $41.39You Save: $10.97 (27%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable Assembly - Parking Brake; Brake Cable; Rear Cable
- Replaces: 7E5Z-2A815-A, AE5Z-2A815-B, 9E5Z-2A815-B
- Base No.: 2853
- Item Weight: 3.70 Pounds
- Item Dimensions: 21.1 x 3.1 x 21.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AE5Z-2A815-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Zephyr Parking Brake Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Zephyr Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Zephyr Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Lincoln Zephyr Parking Brake Cable Parts Q&A
- Q: How to service and repair the rear parking brake cable on 2006 Lincoln Zephyr?A: Service and repair of the rear parking brake cable starts with floor console extraction. Before continuing disconnect the rear parking brake cables from the equalizer while unfastering the parking brake control adjusting nut. Place the vehicle in neutral position then mount it on a hoist before removing the heat shield by removing its 6 retaining nuts and 2 pin-type retainers. The service requires removal of two parking brake cable routing bracket nuts while installation demands a tight torque of 9 Nm (80 inch lbs.). For reinstallation tighten the 6 parking brake cable routing bracket bolts to 23 Nm (17 ft. lbs.). Complete removal of the cables requires first disconnecting the rear parking brake cables from the calipers through the removal of 2 clips. Reverse the uninstallation procedure while adjusting the parking brake cable according to specifications.