FordParts
My Garage
My Account
Cart
OEM 2006 Lincoln Zephyr Power Steering Pump
Power Steering Pump Unit- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Power Steering Pump found
2006 Lincoln Zephyr Power Steering Pump Part Number: 6E5Z-3A696-B
Product Specifications- Other Name: Pump Assembly - Power Steering; Power Steering Reservoir; Power Steering Pump Reservoir
- Manufacturer Note: With Pulley
- Replaces: 6E5Z-3A696-AA
- Base No.: 3A674
- Item Weight: 7.80 Pounds
- Item Dimensions: 8.1 x 7.6 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-3A696-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Zephyr Power Steering Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Zephyr Power Steering Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Zephyr Power Steering Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Lincoln Zephyr Power Steering Pump Parts Q&A
- Q: How to service and repair the power steering pump for the 3.0L engine on 2006 Lincoln Zephyr?A: A suitable suction device allows you to siphon power steering fluid from the reservoir for servicing the power steering pump on 3.0L engines. The following step involves removing the accessory drive belt. Place the vehicle in neutral mode before setting it on a hoist. Disconnect the power steering pressure switch connector then release the clamp and separate the hose connecting the supply to the pump. First replace the power steering pressure line fitting banjo bolt with a new one then disconnect the line from the pump before discarding it with the two seals that must be tightened to 35 Nm (26 ft. lbs.) when reinstalling. Detach the power steering pump by removing its three bolts and the bolts should get tightened to 24 Nm (18 ft. lbs.) when reinstalling. New seals and bolt must be put into place each time the power steering pressure line discombines from the pump. Completion of the service requires you to fill the power steering system.