FordParts
My Garage
My Account
Cart
OEM 2006 Lincoln Zephyr Sway Bar Link
Stabilizer Sway Bar Link- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Sway Bar Links found
2006 Lincoln Zephyr Stabilizer Link, Front Driver Side Part Number: 3M8Z-5K483-L
$38.24 MSRP: $60.73You Save: $22.49 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Link; Suspension Stabilizer Bar Link, Front Left; Sway Bar Link Kit
- Position: Front Driver Side
- Base No.: 5K483
- Item Weight: 0.80 Pounds
- Item Dimensions: 20.1 x 6.2 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3M8Z-5K483-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Zephyr Stabilizer Link, Front Passenger Side Part Number: 3M8Z-5K483-R
$32.63 MSRP: $51.82You Save: $19.19 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Link; Front Right Suspension Stabilizer Bar Link Kit; Sway Bar Link
- Position: Front Passenger Side
- Base No.: 5K483
- Item Weight: 0.80 Pounds
- Item Dimensions: 19.4 x 6.3 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3M8Z-5K483-R
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Zephyr Sway Bar Link
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Zephyr Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Zephyr Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Lincoln Zephyr Sway Bar Link Parts Q&A
- Q: How to Service and Repair the Sway Bar Link on 2006 Lincoln Zephyr?A: Begin sway bar link service by hanging the vehicle on a hoist while placing it in neutral transmission position. It is necessary to use a new part with the same part number for replacements since suspension fasteners control vital systems and using poor-quality parts will result in elevated service expenses. A holding feature should be used during ball stud installation to block rotation. Begin by taking off and getting rid of the upper sway bar link nut before installing the new link followed by tightening the nut to 40 Nm (30 ft. lbs.). The technician needs to remove the lower sway bar link nut followed by the removal of the bar link and after installation he must secure the lower nut to 42 Nm (31 ft. lbs.). The procedure should be finished by executing the reverse order of the removal steps. Proper part retention occurs when you maintain all specified torque values.