My Garage
Cart

OEM 2006 Mercury Milan Knock Sensor

Engine Knock Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Knock Sensors found

  • 2006 Mercury Milan Knock Sensor Diagram - 1S7Z-12A699-BB
    View related parts

    2006 Mercury Milan Knock Sensor Part Number: 1S7Z-12A699-BB

    $44.85 MSRP: $70.00
    You Save: $25.15 (36%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor - Engine Knock; Ignition Knock (Detonation) Sensor; Sensor
    • Replaces: 1S7Z-12A699-BA
    • Base No.: 12A699
    • Item Weight: 0.30 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 1S7Z-12A699-BB
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2006 Mercury Milan Submodels:
    • Base, Hybrid, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
  • 2006 Mercury Milan Knock Sensor - 3M8Z-12A699-AA
    2006 Mercury Milan Knock Sensor Diagram - 3M8Z-12A699-AA
    View related parts
    Product Specifications
    • Other Name: Sensor - Engine Knock; Ignition Knock (Detonation) Sensor
    • Base No.: 12A699
    • Item Weight: 0.40 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 3M8Z-12A699-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2006 Mercury Milan Submodels:
    • Base, Premier | 6 Cyl 3.0 L GAS

2006 Mercury Milan Knock Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Mercury Milan Knock Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Mercury Milan Knock Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Mercury Milan Knock Sensor Parts Q&A

  • Q: How to service the knock sensor on 2006 Mercury Milan?
    A: Service of the knock sensor requires starting by placing the vehicle in neutral position and using a hoist for support. The first step is to disconnect the battery ground wire before taking off the intake manifold. Before replacing the knock sensor you need to extract both the bolt and the sensor device. To complete installation fit the knock sensor by tightening it to 20 Nm (15 lb-ft) using the removed procedure in reverse order.