FordParts
My Garage
My Account
Cart
OEM 2006 Mercury Monterey Vapor Canister
Fuel Vapor Canister- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Vapor Canister found
2006 Mercury Monterey Vapor Canister Part Number: 5F2Z-9D653-AA
Product Specifications- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Manufacturer Note: Complete Asy - Bracket, Canister And Hoses
- Base No.: 9D653
- Item Weight: 9.00 Pounds
- Item Dimensions: 30.0 x 8.3 x 11.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F2Z-9D653-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Mercury Monterey Vapor Canister
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Mercury Monterey Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Mercury Monterey Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Mercury Monterey Vapor Canister Parts Q&A
- Q: What Precautions Should Be Taken with the Vapor Canister to Prevent Explosion or Fire on 2006 Mercury Monterey?A: Fuel vapor contained in the evaporative emission system presents an explosion risk so technicians should disconnect the battery ground cable to prevent electrical sparks that can ignite vapor. Audits show that it is essential to stay away from all fuel-related components when using open flames or carriages lighted tobacco products and also prohibiting the usage of personal electronic devices and smoking. Start with a vehicle embedded in neutral on a hoist then remove the battery ground cable from the unit. The evaporative emission (EVAP) canister needs four mounting bolts removal before lowering the assembly to reveal the EVAP tube quick connect couplings. Unplug the two connections of the EVAP quick connect couplings before removing the EVAP canister. When installing the parts use reverse steps from removal while securing the mounting bolts to 7 Nm tightness (62 lb-in). The repair verification drive cycle with evaporative emission testing must follow the leak test after component installation.