How to Service the Fuel Pressure Sensor on 2006 Mercury Mountaineer?

Disconnect battery ground cable to avoid sparks to service the fuel tank pressure sensor. Take out the EVAP canister and fuel tank shield, sever the sensor and fuel pump couplings. To install the new sensor, repeat the steps in a reverse way, after which a leak test and a verification drive cycle should be carried out.

OEM 2006 Mercury Mountaineer Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pressure Sensor found

View related parts
2006 Mercury Mountaineer Pressure Sensor Part Number: 3F2Z-9G756-AC
$84.64 MSRP: $139.27
You Save: $54.63 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Fuel Injector Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Damper; Fuel Pressure Sensor; Damper
- Manufacturer Note: Also serviced in 9F792. Mounting screws W705870-S437, 6.8L
- Base No.: 9F972
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.3 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F2Z-9G756-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2006 Mercury Mountaineer Fuel Pressure Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Mercury Mountaineer Fuel Pressure Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Mercury Mountaineer Fuel Pressure Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Mercury Mountaineer Fuel Pressure Sensor Parts Q&A

Q: How to Service the Fuel Pressure Sensor on 2006 Mercury Mountaineer?
A: Disconnect battery ground cable to avoid sparks to service the fuel tank pressure sensor. Take out the EVAP canister and fuel tank shield, sever the sensor and fuel pump couplings. To install the new sensor, repeat the steps in a reverse way, after which a leak test and a verification drive cycle should be carried out.