Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 Ford Crown Victoria Seat Switch

Seat Adjust Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Switches found

  • 2007 Ford Crown Victoria Seat Switch - 7W1Z-14A701-AA
    2007 Ford Crown Victoria Seat Switch Diagram - 7W1Z-14A701-AA
    View related parts

    2007 Ford Crown Victoria Control Switch, Passenger Side
    Part Number: 7W1Z-14A701-AA

    Product Specifications
    • Other Name: Switch Assembly - Power Seat Adjustment; Power Seat Switch; Seat Switch; Switch Assembly - Power Seat Adjust
    • Manufacturer Note: Front RH Door
    • Position: Passenger Side
    • Replaces: 5W1Z-14A701-BAB
    • Base No.: 14A701
    • Item Weight: 0.70 Pounds
    • Item Dimensions: 8.2 x 3.0 x 4.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 7W1Z-14A701-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Ford Crown Victoria Submodels:
    • Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
  • 2007 Ford Crown Victoria Seat Switch - 7W1Z-14A701-CA
    2007 Ford Crown Victoria Seat Switch Diagram - 7W1Z-14A701-CA
    View related parts

    2007 Ford Crown Victoria Control Switch, Front Driver Side
    Part Number: 7W1Z-14A701-CA

    Product Specifications
    • Other Name: Switch Assembly; Power Seat Switch, Front Left; Seat Switch; Power Seat Switch
    • Manufacturer Note: Front LH Door
    • Position: Front Driver Side
    • Replaces: 5W1Z-14A701-CAA
    • Base No.: 14A701
    • Item Weight: 0.70 Pounds
    • Item Dimensions: 7.6 x 2.7 x 4.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 7W1Z-14A701-CA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Ford Crown Victoria Submodels:
    • Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2007 Ford Crown Victoria Seat Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Crown Victoria Seat Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Crown Victoria Seat Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Crown Victoria Seat Switch Parts Questions & Experts Answers

  • Q: What precautions should be taken when servicing the power seat switch, particularly the lumbar control switch on 2007 Ford Crown Victoria?
    A: Safety glasses should be worn by technicians while serving the power seat switch including the lumbar control switch because accidental air bag deployment creates a risk of injury. The air bag module connectors should not receive probing because this action might result in deployment as well as harm to the technician. The supplemental restraint system (SRS) should be depowered before starting work so the air bag warning lamp lights up when the RCM fuse is out and the ignition switch is ON yet indicates no fault. A vehicle return to the customer can proceed only after the SRS demonstrates full operational status without any faults. A correct procedure starts with depowering the SRS system then moves on to remove the power lumbar bezel by gently prying its tabs and disconnecting the lumbar control switch electrical connector and disassembling the switch from the vehicle. Recovery of the system requires reversing the removal procedure and enabling power to the SRS.

Related 2007 Ford Crown Victoria Parts

Alternate Year Models

+
2006 Ford Crown Victoria Seat Switch 2008 Ford Crown Victoria Seat Switch