How to service and repair the rear brake caliper on 2007 Ford E-250?

The process of servicing and repairing the rear brake caliper for E-150, E-250 and E-350 models starts with placing the vehicle in neutral gear and hoisting it properly. Only approved DOT 3 motor vehicle brake fluid should be used when servicing brake components to prevent permanent damage and enable avoidance of both inoperative brakes as well as personal injury consequences. You should immediately rinse away brake fluid spills from painted or plastic areas using water. New copper washers must be installed on the brake caliper flow bolt during removal then users should discard the brake hose and old copper washers and keep the flow bolt at hand. The flow bolt requires tightening to 35 Nm (26 ft. lbs) strength after installation. Using any tool to pry inside the caliper sight hole when retracting the pistons will result in damage to the components. Detach the brake caliper by removing its two pin bolts and reattach it afterward by tightening these bolts to 36 Nm (27 ft. lbs). You need to bleed the brake caliper for achieving proper operation.

OEM 2007 Ford E-250 Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Calipers found

View related parts
2007 Ford E-250 Caliper, Front Driver Side Part Number: 6C2Z-2B121-C
$139.29 MSRP: $232.73
You Save: $93.44 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Front Driver Side
- Replaces: 4C2Z-2B121-CB
- Base No.: 2B120
- Item Weight: 13.50 Pounds
- Item Dimensions: 10.0 x 7.5 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-2B121-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2007 Ford E-250 Caliper, Rear Driver Side Part Number: 6C2Z-2553-CB
$83.28 MSRP: $111.91
You Save: $28.63 (26%)
ADD TO CART
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Brake Caliper
- Position: Rear Driver Side
- Replaces: 6C2Z-2553-CA, XC2Z-2553-AE
- Base No.: 2552
- Item Weight: 17.10 Pounds
- Item Dimensions: 8.1 x 5.0 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-2553-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2007 Ford E-250 Caliper, Front Passenger Side Part Number: 6C2Z-2B120-C
$142.49 MSRP: $232.73
You Save: $90.24 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Front Right; Brake Caliper Repair Kit; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Front Passenger Side
- Replaces: 4C2Z-2B120-CB
- Base No.: 2B120
- Item Weight: 13.50 Pounds
- Item Dimensions: 9.8 x 5.1 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-2B120-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2007 Ford E-250 Caliper, Rear Passenger Side Part Number: 6C2Z-2552-CA
$83.28 MSRP: $111.91
You Save: $28.63 (26%)
ADD TO CART
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Brake Caliper
- Manufacturer Note: Service caliper asy. - includes piston, boot, bleed screw, and cap - RH - 06/
- Position: Rear Passenger Side
- Replaces: XC2Z-2552-AE
- Base No.: 2552
- Item Weight: 16.20 Pounds
- Item Dimensions: 8.2 x 5.2 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-2552-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2007 Ford E-250 Caliper, Rear Passenger Side Part Number: XC2Z-2552-AD
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Brake Caliper
- Position: Rear Passenger Side
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XC2Z-2552-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2007 Ford E-250 Caliper, Rear Driver Side Part Number: XC2Z2553AD
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Brake Caliper
- Position: Rear Driver Side
- Item Weight: 19.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XC2Z2553AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2007 Ford E-250 Brake Caliper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford E-250 Brake Caliper available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford E-250 Brake Caliper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford E-250 Brake Caliper Parts Q&A

Q: How to service and repair the rear brake caliper on 2007 Ford E-250?
A: The process of servicing and repairing the rear brake caliper for E-150, E-250 and E-350 models starts with placing the vehicle in neutral gear and hoisting it properly. Only approved DOT 3 motor vehicle brake fluid should be used when servicing brake components to prevent permanent damage and enable avoidance of both inoperative brakes as well as personal injury consequences. You should immediately rinse away brake fluid spills from painted or plastic areas using water. New copper washers must be installed on the brake caliper flow bolt during removal then users should discard the brake hose and old copper washers and keep the flow bolt at hand. The flow bolt requires tightening to 35 Nm (26 ft. lbs) strength after installation. Using any tool to pry inside the caliper sight hole when retracting the pistons will result in damage to the components. Detach the brake caliper by removing its two pin bolts and reattach it afterward by tightening these bolts to 36 Nm (27 ft. lbs). You need to bleed the brake caliper for achieving proper operation.