How to service the brake light switch on 2007 Ford E-250?

In order to service the brake light switch, the electrical connector should be disconnected first. The second step is to take off the cover and the self-locking pin of the switch. Then remove the switch in the brake pedal assembly and the push rod. In order to accomplish the installation, reverse the un-installation process.

OEM 2007 Ford E-250 Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2007 Ford E-250 Stoplamp Switch Part Number: E9TZ-13480-A
$19.47 MSRP: $30.91
You Save: $11.44 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Stop Light; Brake Light Switch; Stop Light Switch
- Base No.: 13480
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.0 x 1.3 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E9TZ-13480-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2007 Ford E-250 Brake Light Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford E-250 Brake Light Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford E-250 Brake Light Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford E-250 Brake Light Switch Parts Q&A

Q: How to service the brake light switch on 2007 Ford E-250?
A: In order to service the brake light switch, the electrical connector should be disconnected first. The second step is to take off the cover and the self-locking pin of the switch. Then remove the switch in the brake pedal assembly and the push rod. In order to accomplish the installation, reverse the un-installation process.