OEM 2007 Ford E-250 Wiper Switch

2007 Ford E-250 Wiper Switch Parts Questions & Experts Answers

• Q: How to service and repair the wiper switch on the steering column multifunction switch on 2007 Ford E-250?

  A: Servicing or repairing the wiper switch on the steering column multifunction switch demands the depowering of the supplemental restraint system (SRS). Begin by inserting the ignition key and turning the ignition switch to the RUN position after which you should use a punch to activate the lock cylinder release tab while drawing it out. The tilt release lever or handle should be detached only when present. Remove the steering column shrouds by taking out three screws then remove the multi-function switch using the two screws, but clamp the new switch with 3 Nm torque during installation. Twist off the electrical connectors of the multi-function switch before installing it back into position using the reverse order for disassembly. The completion process of supplemental restraint system (SRS) power-up requires final steps.