How to service the front fender on 2007 Ford E-250?

Service of the front fender starts with removing the radiator grille opening panel reinforcement. The splash shield requires removal by first loosening threads from screws situated at the bottom of the front fender. The fender-to-cowl side bracket bolts need removal together with the lower fender bolt and its associated shims when service the lower rear portion of the fender. Reinstall these components with a torque of 11 Nm (8 lb-ft). To begin you must untighten the screws holding the front fender-to-radiator support along with the two front fender-to-front end stone deflector screws then tighten these screws to 11 Nm (8 lb-ft) during installation. To detach the front fender one must start by removing front fender-to-upper apron screws and finally taking off the front fender before reinstalling it by following the removal steps and tightening all screws to 11 Nm (8 lb-ft).

OEM 2007 Ford E-250 Fender

Wheel Fender

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fenders found

View related parts
2007 Ford E-250 Fender, Front Passenger Side Part Number: 7C2Z-16005-A
$345.12 MSRP: $541.12
You Save: $196.00 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender Assembly - Front; Fender, Front Right
- Position: Front Passenger Side
- Replaces: 2C2Z-16005-AA, F7UZ-16005-AB
- Base No.: 16005
- Item Weight: 19.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C2Z-16005-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2007 Ford E-250 Fender, Front Driver Side Part Number: 7C2Z-16006-A
$393.56 MSRP: $490.78
You Save: $97.22 (20%)
ADD TO CART
Product Specifications
- Other Name: Fender Assembly - Front; Fender, Front Left
- Position: Front Driver Side
- Replaces: 2C2Z-16006-AA, F7UZ-16006-AC
- Base No.: 16005
- Item Weight: 18.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C2Z-16006-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2007 Ford E-250 Fender

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford E-250 Fender available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford E-250 Fender as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford E-250 Fender Parts Q&A

Q: How to service the front fender on 2007 Ford E-250?
A: Service of the front fender starts with removing the radiator grille opening panel reinforcement. The splash shield requires removal by first loosening threads from screws situated at the bottom of the front fender. The fender-to-cowl side bracket bolts need removal together with the lower fender bolt and its associated shims when service the lower rear portion of the fender. Reinstall these components with a torque of 11 Nm (8 lb-ft). To begin you must untighten the screws holding the front fender-to-radiator support along with the two front fender-to-front end stone deflector screws then tighten these screws to 11 Nm (8 lb-ft) during installation. To detach the front fender one must start by removing front fender-to-upper apron screws and finally taking off the front fender before reinstalling it by following the removal steps and tightening all screws to 11 Nm (8 lb-ft).