FordParts
My Garage
My Account
Cart
OEM 2007 Ford Edge Coolant Reservoir
Coolant Tank Reservoir- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Coolant Reservoir found
2007 Ford Edge Expansion Tank Part Number: AT4Z-8A080-CA
$69.93 MSRP: $101.78You Save: $31.85 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Reservoir; Coolant Reservoir
- Replaces: 9T4Z-8A080-A, 7T4Z-8A080-A
- Base No.: 8A080
- Item Weight: 2.10 Pounds
- Item Dimensions: 10.5 x 13.2 x 11.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AT4Z-8A080-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Edge Coolant Reservoir
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Edge Coolant Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Edge Coolant Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Edge Coolant Reservoir Parts Q&A
- Q: How to service and repair the coolant reservoir on 2007 Ford Edge?A: Service and repairs to the coolant reservoir should start with safety precautions by avoiding the removal of the coolant pressure relief cap when the engine runs or temperature is high since the cooling system contains pressure that emits steam and hot liquid violently. Open the pressure relief cap slowly by turning it counterclockwise one half turn and then proceed to remove the cap. Following hose clamp pliers will allow you to attach the lower degas bottle hose for siphoning coolant from the degas bottle using a proper suction tool. The technician should set aside the upper and lower degas bottle hoses after disconnecting them. To access the degas bottle remove its bottle-to-washer screw as well as securing bolts before extracting it. The installation requires users to tighten bolts to 9 Nm (80 inch lbs) while following the removal steps in reverse order together with filling the degas bottle at the end.