FordParts
My Garage
My Account
Cart
OEM 2008 Ford Edge Coolant Reservoir
Coolant Tank Reservoir- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Coolant Reservoir found
2008 Ford Edge Expansion Tank Part Number: AT4Z-8A080-CA
$69.93 MSRP: $101.78You Save: $31.85 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Reservoir; Coolant Reservoir
- Replaces: 9T4Z-8A080-A, 7T4Z-8A080-A
- Base No.: 8A080
- Item Weight: 2.10 Pounds
- Item Dimensions: 10.5 x 13.2 x 11.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AT4Z-8A080-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Edge Coolant Reservoir
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Edge Coolant Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Edge Coolant Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Edge Coolant Reservoir Parts Q&A
- Q: How to service the coolant reservoir safely and effectively on 2008 Ford Edge?A: The coolant reservoir needs servicing by waiting for engine cooling before open the cooling system because system pressure results in forceful steam and hot liquid discharge leading to dangerous injuries. First step is to reduce pressure in the cooling system through counterclockwise rotation of the pressure relief cap by one half turn then remove it. Clamp down the lower degas bottle hose with hose clamp pliers before using a suitable suction device to drain coolant from the bottle. Detach the upper and lower hose connections of the degas bottles then position them safely aside. Unbolt and disconnect the degas bottle including its screw attachment to the washer bottle while extracting the bottle from its position. Reinstall by fastening the bolts to 9 Nm (80 lb-in) specifications following the reverse removal process while filling the degas bottle at the end.