FordParts
My Garage
My Account
Cart
OEM 2007 Ford Edge Sway Bar Link
Stabilizer Sway Bar Link- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Sway Bar Links found
2007 Ford Edge Stabilizer Link, Front Part Number: 7T4Z-5K483-A
$56.80 MSRP: $93.45You Save: $36.65 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front
- Base No.: 5K483
- Item Weight: 1.10 Pounds
- Item Dimensions: 1.0 x 5.0 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7T4Z-5K483-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Edge Stabilizer Link, Rear Part Number: 7T4Z-5A486-AA
$75.22 MSRP: $109.48You Save: $34.26 (32%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear
- Base No.: 5A486
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7T4Z-5A486-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Edge Sway Bar Link
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Edge Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Edge Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Edge Sway Bar Link Parts Q&A
- Q: How to service and repair the rear sway bar link on 2007 Ford Edge?A: Start the service and repair of rear sway bar and link operations by positioning the vehicle in neutral at a hoist station. After discarding the upper nuts from the sway bar link you should install the new link while tightening each nut to 35 Nm (26 ft. lbs). Next remove and throw away the lower nuts of the sway bar link while extracting sway bar links for installation where new nuts should be tightened to 35 Nm (26 ft. lbs). Following the removal of the sway bar bracket nuts discard them before removing the bar brackets together with the sway bar and tightening new nuts at 55 Nm (41 ft. lbs). Check the sway bar bushings before installing new ones whenever there is a need for replacement. The last step is to perform the removal process in reverse order to finish installing the components. Correct retention of critical suspension components depends on the use of new parts with same part numbers along with proper torque value adherence during reassembly.