FordParts
My Garage
My Account
Cart
OEM 2007 Ford Edge Vapor Canister
Fuel Vapor Canister- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Vapor Canister found
2007 Ford Edge Vapor Canister Part Number: 7T4Z-9D653-B
$261.08 MSRP: $443.64You Save: $182.56 (42%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Base No.: 9D653
- Item Weight: 10.60 Pounds
- Item Dimensions: 7.1 x 11.9 x 30.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-9D653-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Edge Vapor Canister
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Edge Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Edge Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Edge Vapor Canister Parts Q&A
- Q: What Precautions Should Be Taken with the Vapor Canister in the Evaporative Emission System to Prevent Explosion or Fire on 2007 Ford Edge?A: The evaporative emission system carries two different volatile fuel components that create fire risks so the technician should disconnect the battery ground cable as an electrical spark prevention method. The risk of highly flammable mixtures igniting requires no smoking along with the prohibition of carrying lighted tobacco and using open flames near fuel-related components. The work area needs to stay free from personal electronic devices which include cell phones together with audio equipment. First position the hoist arm to the frame lifting point before placing the vehicle in neutral position on the hoist. The repair process begins with removing the three bolts together with the pushpin retainer and evaporative emission shield. After installation refasten all components to 9 Nm (80 lb-in torque). The technician disconnects the EVAP canister vent solenoid electrical connector followed by disconnecting the two quick connect couplings from the EVAP canister assembly before separating the EVAP vapor tube from the EVAP dust separator. During reinstallation secure the three EVAP canister assembly bracket bolts at 9 Nm (80 lb-in). Untie and take out the pushpin retainer system while removing the EVAP canister assembly. During reinstallation start by inserting the alignment tab into the body before you install the pushpin followed by the three bolts while following the order of removal steps. To complete the process run both the leak test as well as the evaporative emission repair verification drive cycle.