How to service the thermostat housing on a 2.3L engine on 2007 Ford Escape?

To replace the thermostat housing on a 2.3L engine, lift up the car and empty the cooling system. Take off the accessory drive belt, disconnect hoses and unbolt the thermostat housing. Adjust the new housing to 10 Nm, check and change the gasket when necessary and refill and bleed the cooling system.

OEM 2007 Ford Escape Thermostat

Engine Coolant Thermostat

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat found

View related parts
2007 Ford Escape Thermostat Housing Part Number: 3M4Z-8575-B
$30.23 MSRP: $48.00
You Save: $17.77 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Thermostat Assembly; Engine Coolant Thermostat Kit; Thermostat Housing Cover; Thermostat Integral; Thermostat, Coolant; Thermostat Unit; Thermostat; Engine Coolant Thermostat
- Replaces: 3M4Z-8575-A, 3M4Z-8575-AB
- Base No.: 8575
- Item Weight: 0.90 Pounds
- Item Dimensions: 8.7 x 7.7 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3M4Z-8575-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, S, SE, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS

2007 Ford Escape Thermostat

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Escape Thermostat available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Escape Thermostat as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Escape Thermostat Parts Q&A

Q: How to service the thermostat housing on a 2.3L engine on 2007 Ford Escape?
A: To replace the thermostat housing on a 2.3L engine, lift up the car and empty the cooling system. Take off the accessory drive belt, disconnect hoses and unbolt the thermostat housing. Adjust the new housing to 10 Nm, check and change the gasket when necessary and refill and bleed the cooling system.