How to remove and replace the front bumper cover on 2007 Ford Expedition?

First remove the three retainers of the air deflector along with its pin-type connections followed by setting the air deflector to the side. The first step involves removing both lower pin-type retainers from the front bumper cover after which the four screws on the left-hand and right-hand front fender splash shields need to be taken out. You should remove four bolts that attach the front bumper cover to the fenders while you install them at a torque of 11 Nm (8 lb-ft). Disembark the electrical connectors from left-hand and right-hand fog lamps when fog lamps exist on the vehicle. The upper air deflector removal requires uninstalling the ten pin-type retainers while keeping in mind that right-side examples are presented with similar configurations on the left side. The installation process requires the removal of lower air deflector upper pin-type retainers together with the four grille-to-radiator support bolts. The installation of the front bumper cover requires following the exact opposite steps used during removal.

OEM 2007 Ford Expedition Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Bumpers found

View related parts
2007 Ford Expedition Lower Cover, Front Part Number: CL1Z-17D957-BPTM
$285.27 MSRP: $333.26
You Save: $47.99 (15%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front Lower
- Position: Front Lower
- Replaces: 7L1Z-17D957-CPTM
- Base No.: 17D957B
- Item Weight: 7.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: CL1Z-17D957-BPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Expedition Impact Bar, Front Part Number: CL1Z-17757-B
$135.09 MSRP: $208.47
You Save: $73.38 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Position: Front
- Replaces: 7L1Z-17757-A, CL1Z-17757-A
- Base No.: 17757
- Item Weight: 29.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: CL1Z-17757-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Expedition Upper Cover, Front Part Number: 7L1Z-17D957-BPTM
$195.30 MSRP: $213.21
You Save: $17.91 (9%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front Upper
- Position: Front Upper
- Base No.: 17D957A
- Item Weight: 27.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17D957-BPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Expedition Impact Bar, Rear Part Number: 7L1Z-17906-A
$607.73 MSRP: $900.33
You Save: $292.60 (33%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover Reinforcement Beam, Rear; Bumper Impact Bar, Rear; Reinforcement
- Position: Rear
- Base No.: 17906
- Item Weight: 56.10 Pounds
- Item Dimensions: 70.4 x 26.5 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17906-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Expedition Submodels:
- EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Expedition Impact Bar, Rear Part Number: 7L1Z-17906-C
$505.76 MSRP: $742.67
You Save: $236.91 (32%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover Reinforcement Beam, Rear; Bumper Impact Bar, Rear; Reinforcement
- Position: Rear
- Base No.: 17906
- Item Weight: 68.00 Pounds
- Item Dimensions: 67.7 x 28.4 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17906-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Expedition Submodels:
- Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Expedition Bumper Cover, Rear Part Number: 7L1Z-17K835-CA
$239.46 MSRP: $351.63
You Save: $112.17 (32%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Base No.: 17K835
- Item Weight: 14.30 Pounds
- Item Dimensions: 75.5 x 36.8 x 11.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17K835-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Expedition Submodels:
- EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Expedition Bumper Cover, Rear Part Number: 7L1Z-17K835-BPTM
$239.83 MSRP: $352.17
You Save: $112.34 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Base No.: 17K835
- Item Weight: 27.60 Pounds
- Item Dimensions: 82.4 x 20.4 x 37.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17K835-BPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Expedition Submodels:
- Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Expedition Impact Bar, Rear Part Number: 7L1Z-17906-B
$214.80 MSRP: $315.42
You Save: $100.62 (32%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear; Reinforcement
- Position: Rear
- Base No.: 17906
- Item Weight: 54.10 Pounds
- Item Dimensions: 72.1 x 26.8 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17906-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Expedition Submodels:
- EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Expedition Upper Cover, Front Part Number: 7L1Z-17D957-APTM
$192.91 MSRP: $280.80
You Save: $87.89 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front Upper
- Manufacturer Note: Paint to match
- Position: Front Upper
- Base No.: 17D957A
- Item Weight: 27.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17D957-APTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Expedition Bumper Cover, Rear Part Number: 7L1Z-17K835-AA
$273.65 MSRP: $401.83
You Save: $128.18 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Base No.: 17K835
- Item Weight: 25.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17K835-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Expedition Submodels:
- Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Expedition Impact Bar, Rear Part Number: 7L1Z-17906-D
$480.68 MSRP: $705.85
You Save: $225.17 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover Reinforcement Beam, Rear; Bumper Impact Bar, Rear; Reinforcement
- Position: Rear
- Base No.: 17906
- Item Weight: 54.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17906-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Expedition Submodels:
- Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Expedition Lower Cover, Front Part Number: 7L1Z-17D957-AA
$188.93 MSRP: $275.00
You Save: $86.07 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front Lower
- Position: Front Lower
- Base No.: 17D957B
- Item Weight: 27.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-17D957-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2007 Ford Expedition Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Expedition Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Expedition Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Expedition Bumper Parts Q&A

Q: How to remove and replace the front bumper cover on 2007 Ford Expedition?
A: First remove the three retainers of the air deflector along with its pin-type connections followed by setting the air deflector to the side. The first step involves removing both lower pin-type retainers from the front bumper cover after which the four screws on the left-hand and right-hand front fender splash shields need to be taken out. You should remove four bolts that attach the front bumper cover to the fenders while you install them at a torque of 11 Nm (8 lb-ft). Disembark the electrical connectors from left-hand and right-hand fog lamps when fog lamps exist on the vehicle. The upper air deflector removal requires uninstalling the ten pin-type retainers while keeping in mind that right-side examples are presented with similar configurations on the left side. The installation process requires the removal of lower air deflector upper pin-type retainers together with the four grille-to-radiator support bolts. The installation of the front bumper cover requires following the exact opposite steps used during removal.