How to Service the LH Camshaft Position Sensor on 2007 Ford Expedition?

In order to service the left hand camshaft position (CMP) sensor, disconnect the electrical connector, remove the securing bolt, and remove the air cleaner outlet pipe. Install the new sensor, fix the bolt up to 10 Nm (89 lb-in) and lubricate the O-ring with clean engine oil. Turn the process in reverse to install.

OEM 2007 Ford Expedition Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2007 Ford Expedition Camshaft Position Sensor Part Number: 1W7Z-6B288-AB
$31.26 MSRP: $49.64
You Save: $18.38 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Engine Camshaft Position Sensor; Camshaft Sensor; Position Sensor; Camshaft Position Sen
- Replaces: 1W7Z-6B288-AA
- Base No.: 6B288
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.1 x 1.3 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W7Z-6B288-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, XL, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2007 Ford Expedition Camshaft Position Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Expedition Camshaft Position Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Expedition Camshaft Position Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Expedition Camshaft Position Sensor Parts Q&A

Q: How to Service the LH Camshaft Position Sensor on 2007 Ford Expedition?
A: In order to service the left hand camshaft position (CMP) sensor, disconnect the electrical connector, remove the securing bolt, and remove the air cleaner outlet pipe. Install the new sensor, fix the bolt up to 10 Nm (89 lb-in) and lubricate the O-ring with clean engine oil. Turn the process in reverse to install.