How to service the brake light switch on 2007 Ford Explorer?

Service of the brake light switch requires checking for the absence of brake pedal and brake booster and master cylinder removal before disconnecting the stoplamp switch. Installation of the stoplamp switch remains prohibited until the brake pedal arm gets properly attached to the brake booster push rod. You should never manipulate the brake pedal through pulling or pushing actions during the switch operation to protect the device function along with maintaining its normal state. The first step must involve disconnecting the electrical connector which is attached to the stoplamp switch. The stoplamp switch can be taken out by rotating it 45 degrees clockwise. To install the component perform the opposite steps of removal.

OEM 2007 Ford Explorer Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2007 Ford Explorer Stoplamp Switch Part Number: 3M5Z-13480-AB
$23.24 MSRP: $36.91
You Save: $13.67 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Stop Light; Brake Light Switch
- Replaces: 3M5Z-13480-AA
- Base No.: 13480
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 2.7 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3M5Z-13480-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2007 Ford Explorer Brake Light Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Explorer Brake Light Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Explorer Brake Light Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Explorer Brake Light Switch Parts Q&A

Q: How to service the brake light switch on 2007 Ford Explorer?
A: Service of the brake light switch requires checking for the absence of brake pedal and brake booster and master cylinder removal before disconnecting the stoplamp switch. Installation of the stoplamp switch remains prohibited until the brake pedal arm gets properly attached to the brake booster push rod. You should never manipulate the brake pedal through pulling or pushing actions during the switch operation to protect the device function along with maintaining its normal state. The first step must involve disconnecting the electrical connector which is attached to the stoplamp switch. The stoplamp switch can be taken out by rotating it 45 degrees clockwise. To install the component perform the opposite steps of removal.