FordParts
My Garage
My Account
Cart
OEM 2007 Ford F-150 Fuel Pressure Sensor
Fuel Tank Pressure Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Fuel Pressure Sensors found
2007 Ford F-150 Pressure Sensor Part Number: 3F2Z-9G756-AC
$84.64 MSRP: $139.27You Save: $54.63 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Sensor - Fuel Injector Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Damper; Fuel Pressure Sensor; Damper
- Manufacturer Note: Also serviced in 9F792. Mounting screws W705870-S437, 6.8L
- Base No.: 9F972
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.3 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F2Z-9G756-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford F-150 Pressure Sensor Part Number: 5C3Z-9G756-AE
$84.73 MSRP: $134.55You Save: $49.82 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor - Fuel Injector Pressure; Fuel Injection Pressure Sensor; Fuel Tank Pressure Sensor; Fuel Pressure Sensor
- Replaces: 5C3Z-9G756-AA, 5C3Z-9G756-AD, CM-5230, CM-5259
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-9G756-AE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford F-150 Fuel Pressure Sensor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford F-150 Fuel Pressure Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford F-150 Fuel Pressure Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford F-150 Fuel Pressure Sensor Parts Q&A
- Q: How to Service the Fuel Pressure Sensor on the Fuel Rail on 2007 Ford F-150?A: Before servicing the fuel rail pressure and temperature sensor the user needs to release fuel system pressure. First disconnect both the electrical connector and vacuum connector from the sensor. Depending on clearance, remove the sensor by unfastening its bolts. For new sensor installation you should tighten the bolts to 6 Nm which equals (53 lb-in). Install a new O-ring seal by lubricating it with clean engine oil before mounting it on the system. Execute the backward procedure to finish the sensor installation.