My Garage
Cart

OEM 2007 Ford F-150 Hood Latch

Engine Hood Latch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood Latch found

  • 2007 Ford F-150 Hood Latch Diagram - 4L3Z-16700-AB
    View related parts

    2007 Ford F-150 Lock, Front Part Number: 4L3Z-16700-AB

    $37.73 MSRP: $53.98
    You Save: $16.25 (31%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Latch Assembly - Hood; Hood Latch, Front; Latch; Hood Latch
    • Position: Front
    • Replaces: 4L3Z-16700-AA
    • Base No.: 16700
    • Item Weight: 1.50 Pounds
    • Item Dimensions: 6.5 x 5.2 x 2.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4L3Z-16700-AB
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Ford F-150 Submodels:
    • FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS

2007 Ford F-150 Hood Latch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford F-150 Hood Latch available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford F-150 Hood Latch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford F-150 Hood Latch Parts Q&A

  • Q: How to service and repair the hood latch on 2007 Ford F-150?
    A: Service and repair of the hood latch begins by ejecting seven pin-type retainers and the radiator upper sight shield from their locations. Apply a permanent marker to the hood latch position on the vehicle before unscrewing the two hood latch bolts then putting the hood latch to the side. First detach the primary and secondary hood latch release cables before taking out the hood latch. Execute the opposite steps of removal to install the hood latch by tightening all bolts to 12 Nm (9 lb-ft). The installation process requires a check of the hood latch alignment before applying lubrication to the device after completion.