My Garage
Cart

OEM 2008 Ford F-150 Hood Latch

Engine Hood Latch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood Latch found

  • 2008 Ford F-150 Hood Latch Diagram - 4L3Z-16700-AB
    View related parts

    2008 Ford F-150 Lock, Front Part Number: 4L3Z-16700-AB

    $37.73 MSRP: $53.98
    You Save: $16.25 (31%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Latch Assembly - Hood; Hood Latch, Front; Latch; Hood Latch
    • Position: Front
    • Replaces: 4L3Z-16700-AA
    • Base No.: 16700
    • Item Weight: 1.50 Pounds
    • Item Dimensions: 6.5 x 5.2 x 2.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4L3Z-16700-AB
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2008 Ford F-150 Submodels:
    • FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS

2008 Ford F-150 Hood Latch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-150 Hood Latch available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-150 Hood Latch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford F-150 Hood Latch Parts Q&A

  • Q: How to service and repair the hood latch on 2008 Ford F-150?
    A: A service repair process starts with unmounting the 7 pin-type retainers together with the radiator upper sight shield. Before bolting removal, apply permanent type marker to locate the hood latch so you can remove its 2 bolts while placing the hood latch to the side. Disconnect the cables for the primary and secondary release system of the hood latch before removing it. You should reinstall the hood latch using the opposite installation sequence while tightening hood bolts to 12 Nm (106 lb-in). Inspect the hood latch alignment after installation by checking its correct position and then apply lubrication to the device.