FordParts
My Garage
My Account
Cart
OEM 2007 Ford F-250 Super Duty Evaporator
A/C Evaporator Core- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Evaporators found
2007 Ford F-250 Super Duty Evaporator Assembly Part Number: 5C3Z-19B555-BA
$287.16 MSRP: $421.67You Save: $134.51 (32%)Product Specifications- Other Name: Evaporator And Housing Assembly; A/C Evaporator Core and Case Assembly; A/C Evaporator Core Repair Kit; Heater Core; Case Assembly; A/C Evaporator
- Replaces: 1C3Z-19B555-EA
- Base No.: 19B555
- Item Weight: 14.60 Pounds
- Item Dimensions: 25.3 x 24.4 x 17.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-19B555-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford F-250 Super Duty Evaporator Core, Front Part Number: 4C3Z-19860-AB
$130.74 MSRP: $215.13You Save: $84.39 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Core - Air Conditioning Evaporator; A/C Evaporator Core, Front; A/C Evaporator Core Repair Kit; A/C Evaporator Core; A/C Evaporator; Evaporator
- Position: Front
- Replaces: F81Z-19860-AA
- Base No.: 19860
- Item Weight: 5.60 Pounds
- Item Dimensions: 9.3 x 13.9 x 14.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C3Z-19860-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Evaporator And Housing Assembly; A/C Evaporator Core and Case Assembly; A/C Evaporator Core Repair Kit; Heater Core; Case Assembly; A/C Evaporator
- Base No.: 19B555
- Item Weight: 15.10 Pounds
- Item Dimensions: 24.2 x 21.9 x 17.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-19B555-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford F-250 Super Duty Evaporator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford F-250 Super Duty Evaporator available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford F-250 Super Duty Evaporator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford F-250 Super Duty Evaporator Parts Q&A
- Q: How to service and repair the evaporator core in an air conditioning system on 2007 Ford F-250 Super Duty?A: The first step to evaporator core service and repair is to check for leaks and perform a test before removing the core. Replacement of the suction accumulator during air conditioning system repair procedures only becomes necessary when the A/C compressor fails or damage appears on the suction accumulator itself. You should start by disconnecting the A/C fittings before removing both the suction accumulator and oil filler neck. Installation of the auxiliary evaporator inlet line must be completed by tightening its fittings to 8 Nm (71 lb-in). The auxiliary evaporator outlet line fitting requires disconnection before installing it by tightening to 8 Nm (71 lb-in). You should disconnect the condenser to evaporator line while discarding its O-ring seals. Tighten the bracket for installation at 7 Nm (62 lb-in) after realigning it properly without the nuts. You must tighten the screws that secure the evaporator core housing support bracket to 11 Nm (8 lb-ft) at installation time. Begin by taking out the retainers then the evaporator core cover heat shield followed by removal of all 10 screws holding the evaporator core cover. Remove the evaporator core as the last step of the process. You should perform the installation by reversing the removal steps while replacing O-ring seals with new ones and properly lubricating the refrigerant system with clean PAG oil. The process ends by removing trapped air and conducting leak tests followed by refrigerator system recharging.