FordParts
My Garage
My Account
Cart
OEM 2006 Ford F-250 Super Duty Evaporator
A/C Evaporator Core- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Evaporators found
2006 Ford F-250 Super Duty Evaporator Assembly Part Number: 5C3Z-19B555-BA
$287.16 MSRP: $421.67You Save: $134.51 (32%)Product Specifications- Other Name: Evaporator And Housing Assembly; A/C Evaporator Core and Case Assembly; A/C Evaporator Core Repair Kit; Heater Core; Case Assembly; A/C Evaporator
- Replaces: 1C3Z-19B555-EA
- Base No.: 19B555
- Item Weight: 14.60 Pounds
- Item Dimensions: 25.3 x 24.4 x 17.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-19B555-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford F-250 Super Duty Evaporator Core, Front Part Number: 4C3Z-19860-AB
$130.74 MSRP: $215.13You Save: $84.39 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Core - Air Conditioning Evaporator; A/C Evaporator Core, Front; A/C Evaporator Core Repair Kit; A/C Evaporator Core; A/C Evaporator; Evaporator
- Position: Front
- Replaces: F81Z-19860-AA
- Base No.: 19860
- Item Weight: 5.60 Pounds
- Item Dimensions: 9.3 x 13.9 x 14.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C3Z-19860-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Evaporator And Housing Assembly; A/C Evaporator Core and Case Assembly; A/C Evaporator Core Repair Kit; Heater Core; Case Assembly; A/C Evaporator
- Base No.: 19B555
- Item Weight: 15.10 Pounds
- Item Dimensions: 24.2 x 21.9 x 17.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-19B555-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford F-250 Super Duty Evaporator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford F-250 Super Duty Evaporator available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford F-250 Super Duty Evaporator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford F-250 Super Duty Evaporator Parts Q&A
- Q: How to service and repair the evaporator core on 2006 Ford F-250 Super Duty?A: Before you remove the evaporator core you need to perform a leak test when leak suspicion exists. A vehicle requires a fresh suction accumulator only in cases where the A/C compressor fails or damages the suction accumulator system. The service process starts with 6.0L diesel engine vehicles by dismantling retainers and insulator units before uninstalling the evaporator core housing. Businesses must first detach the oil filler neck and suction accumulator and disconnect all A/C fittings from the auxiliary evaporator inlet to outlet line before reinstallation where torques should be set to 8 Nm (71 lb-in). User must disconnect the condenser to evaporator line then discard O-ring seals. Move the nuts out to shift the bracket into position before firming its attachment to 7 Nm (62 lb-in). Continue by stripping off the screws from the evaporator core housing support bracket then tighten the reinstallation screws to 11 Nm (8 lb-ft). All vehicles require the removal of retainers and evaporator core cover heat shield before using a wrench to uninstall the 10 screws from the evaporator core cover and finally extracting the evaporator core from the system. Installation of the new evaporator core requires following removal steps in reverse order together with new O-ring seal installation and correct PAG oil clean lubrication of the refrigerant system. The last step includes evacuation and leak testing and charging of the refrigerant system.