How to Service and Repair the A/C Hose Compressor Manifold and Tube Assembly on 2007 Ford F-350 Super Duty?

Processing and fixing the compressor manifold and tube assembly starts by placing the vehicle in NEUTRAL mode on a hoist and recovering the refrigerant from the system. You should open the lug wrench to disconnect the manifold assembly at the suction accumulator while tightening to 8 Nm (71 lb-in). Remove and scrap the O-ring seals used during this process. Recovery begins with taking off the tube clamp and pin-type retainers along with the sight shield before disconnecting the A/C condenser core inlet line which requires tightening to 8 Nm (71 lb-in) when reconnecting it. Remove the electrical connector of the pressure cutoff switch. The technician must remove the A/C manifold and tube bolt before separating the assembly and repeat installation using a torque of 21 Nm with new O-ring seal discarding. The removal and installation process for the manifold and tube assembly mirrors how it is done in rear-wheel drive vehicles until the pressure cutoff/dual function pressure switch is removed when full torque of 10 Nm (89 lb-in) will be applied during installation. The removal steps should be performed in reverse order for installation while using new O-ring seals along with proper clean PAG oil for refrigerant lubrication. The refrigerant system requires evacuation along with leak testing and subsequent charging as the last step.

OEM 2007 Ford F-350 Super Duty A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 A/C Hoses found

View related parts
2007 Ford F-350 Super Duty Discharge Line
Part Number: JU2Z19D734B
$114.96 MSRP: $189.16
You Save: $74.20 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - Compressor To Manifold; A/C Manifold Hose Assembly; A/C Refrigerant Hose; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Replaces: 4C3Z-19D850-CA, 6C3Z-19D850-CA, 7C3Z-19D850-C, YF-3196
- Item Weight: 2.00 Pounds
- Item Dimensions: 5.8 x 15.5 x 29.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: JU2Z19D734B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-350 Super Duty Submodels:
- FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 6.0L V8, 8 Cyl 6.0 L DIESEL
View related parts
2007 Ford F-350 Super Duty A/C Line
Part Number: 6C3Z-19835-BA
$94.46 MSRP: $155.42
You Save: $60.96 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Hose; Accumulator Outlet; Liquid Hose; Orifice Tube.; Liquid Line; Tube
- Replaces: F81Z-19837-AA
- Base No.: 19837
- Item Weight: 3.20 Pounds
- Item Dimensions: 4.2 x 9.2 x 18.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C3Z-19835-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2007 Ford F-350 Super Duty Discharge Line
Part Number: 4C3Z-19D850-AA
$130.39 MSRP: $214.55
You Save: $84.16 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - Compressor To Manifold; A/C Manifold Hose Assembly; A/C Refrigerant Hose; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Base No.: 19D734
- Item Weight: 2.70 Pounds
- Item Dimensions: 8.7 x 7.1 x 39.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C3Z-19D850-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
2007 Ford F-350 Super Duty Discharge Line
Part Number: 8C3Z-19D850-A
Product Specifications
- Other Name: Tube - Compressor To Manifold; A/C Refrigerant Hose; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Replaces: 5C3Z-19D850-AA
- Base No.: 19D850
- Item Weight: 1.70 Pounds
- Item Dimensions: 5.6 x 8.5 x 33.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C3Z-19D850-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
2007 Ford F-350 Super Duty Hose & Tube Assembly
Part Number: JU2Z19D850K
Product Specifications
- Other Name: Tube - Compressor To Manifold; A/C Refrigerant Hose; A/C Refrigerant Liquid Hose; A/C Hose
- Replaces: 7C3Z-19D850-A, 7C3Z-19D850-B, 6C3Z-19D850-BA, YF-3459
- Item Weight: 4.70 Pounds
- Item Dimensions: 34.6 x 4.9 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: JU2Z19D850K
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-350 Super Duty Submodels:
- FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 6.0L V8, 8 Cyl 6.0 L DIESEL

2007 Ford F-350 Super Duty A/C Hose

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford F-350 Super Duty A/C Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford F-350 Super Duty A/C Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford F-350 Super Duty A/C Hose Parts Questions & Experts Answers

Q: How to Service and Repair the A/C Hose Compressor Manifold and Tube Assembly on 2007 Ford F-350 Super Duty?
A: Processing and fixing the compressor manifold and tube assembly starts by placing the vehicle in NEUTRAL mode on a hoist and recovering the refrigerant from the system. You should open the lug wrench to disconnect the manifold assembly at the suction accumulator while tightening to 8 Nm (71 lb-in). Remove and scrap the O-ring seals used during this process. Recovery begins with taking off the tube clamp and pin-type retainers along with the sight shield before disconnecting the A/C condenser core inlet line which requires tightening to 8 Nm (71 lb-in) when reconnecting it. Remove the electrical connector of the pressure cutoff switch. The technician must remove the A/C manifold and tube bolt before separating the assembly and repeat installation using a torque of 21 Nm with new O-ring seal discarding. The removal and installation process for the manifold and tube assembly mirrors how it is done in rear-wheel drive vehicles until the pressure cutoff/dual function pressure switch is removed when full torque of 10 Nm (89 lb-in) will be applied during installation. The removal steps should be performed in reverse order for installation while using new O-ring seals along with proper clean PAG oil for refrigerant lubrication. The refrigerant system requires evacuation along with leak testing and subsequent charging as the last step.