OEM 2007 Ford Five Hundred EGR Tube

2007 Ford Five Hundred EGR Tube Parts Questions & Experts Answers

• Q: How to Service and Repair the EGR Tube in the Exhaust Gas Recirculation System on 2007 Ford Five Hundred?

  A: Service technicians should start by using a hoist to lift the vehicle into NEUTRAL position when repairing or servicing EGR system module tubes. First remove the roll restrictor brace using its 4 bolts while cleaning each bolt using a wire brush before adding thread lock to threads and securing the bolts at 55 Nm (41 lb-ft). After removal of the bolt and the transaxle roll restrictor brace proceed to clean the bolts and apply threadlock before tightening them to 48 Nm (35 lb-ft) during reinstallation. After detaching the fitting for the EGR system module from its pipeline you should tighten it to an ideal torque of 40 Nm (30 lb-ft). Next remove the tube connecting the EGR system module tube with the right-hand exhaust manifold by disconnecting their fitting. Follow installation procedure by securing this fitting at 40 Nm (30 lb-ft). Implement the reverse order of steps to finish up with the assembly.