FordParts
My Garage
My Account
Cart
OEM 2007 Ford Focus Brake Backing Plate
Brake Dust Shield- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Brake Backing Plates found
Product Specifications- Other Name: Plate Assembly - Brake Backing; Brake Backing Plate, Rear Right; Brake Dust Shield; Plate Assembly - Brake Back
- Position: Rear Passenger Side
- Base No.: 2211
- Item Weight: 3.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-2211-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Shield - Splash; Brake Dust Shield, Rear Right; Brake Dust Shield
- Position: Rear Passenger Side
- Base No.: 2C028B
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 98AZ-2C028-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Plate Assembly - Brake Backing; Brake Backing Plate, Rear Left; Brake Dust Shield; Plate Assembly - Brake Back
- Position: Rear Driver Side
- Base No.: 2211
- Item Weight: 3.30 Pounds
- Item Dimensions: 11.9 x 2.3 x 12.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-2212-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Rear Left; Brake Dust Shield
- Position: Rear Driver Side
- Base No.: 2C028A
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 98AZ-2C028-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Focus Brake Backing Plate
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Focus Brake Backing Plate available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Focus Brake Backing Plate as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Focus Brake Backing Plate Parts Q&A
- Q: How to service and repair the brake backing plate on 2007 Ford Focus?A: The first step to fix the brake backing plate requires removing brake shoes then disconnecting the brake tube fitting from the wheel cylinder while tightening the fitting to 8 Nm (71 inch lbs). The procedure requires removal of both wheel cylinder bolts and the wheel cylinder later installation demands a torque of 12 Nm (9 ft. lbs.). The backing plate requires removal by first pressing on the retaining clip to release the parking brake cable from the backing plate and next removing the backing plate rivets. Before reversal of removal steps for reinstallation all mating surfaces need to be checked for foreign material. The completion of the brake system requires performing a bleeding procedure. Only DOT 3 brake fluid must be used for brake maintenance because alternative fluids will permanently damage brake components to an extent that makes the brakes nonoperational leading to possible personal harm. The spill of brake fluid should be addressed by wiping it up right away whenever it comes into contact with painted surfaces or plastics. You should obtain emergency medical information about brake fluid by consulting with medical professionals or Ford/Motorcraft products in the USA or Canada at 1-800-959-3673 and review the product Material Safety Data Sheet (MSDS) if it exists.