FordParts
My Garage
My Account
Cart
OEM 2008 Ford Focus Brake Backing Plate
Brake Dust Shield- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Backing Plates found
Product Specifications- Other Name: Plate Assembly - Brake Backing; Brake Backing Plate, Rear Right; Brake Dust Shield; Plate Assembly - Brake Back
- Position: Rear Passenger Side
- Base No.: 2211
- Item Weight: 3.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-2211-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Plate Assembly - Brake Backing; Brake Backing Plate, Rear Left; Brake Dust Shield; Plate Assembly - Brake Back
- Position: Rear Driver Side
- Base No.: 2211
- Item Weight: 3.30 Pounds
- Item Dimensions: 11.9 x 2.3 x 12.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-2212-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Focus Brake Backing Plate
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Focus Brake Backing Plate available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Focus Brake Backing Plate as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Focus Brake Backing Plate Parts Q&A
- Q: How to service and repair the brake backing plate on 2008 Ford Focus?A: Service and repair operations of the brake backing plate start with brake shoe removal. The brake tube should be disconnected from the wheel cylinder but be securely tightened to 15 Nm (11 lb-ft) before returning it to its position. First remove the wheel cylinder along with its two bolts but restore the bolt torques to 12 Nm (9 lb-ft) after reinstallation. Press the retaining clip to break the parking brake cable connection with the backing plate. Set the wheel speed sensor aside by removing its bolt but reinstall it tight to 9 Nm (80 lb-in). Afterward remove the wheel spindle bolts and wheel spindle and backing plate in sequence. Reinstall all components with wheel spindle bolts at 66 Nm (49 lb-ft) torque value. The specified sealant should be applied to the wheel cylinder as a bead before installation and all mating surfaces need to remain free from foreign substances. The bleeding of the wheel cylinder should be performed after reinstalling all components in the reverse order of disassembly. The system suffers contamination and damage when you use brake fluid that fails to comply with manufacturer requirements hence instantly flush painted or plastic surfaces with water when brake fluid drips occur. To obtain emergency medical details about Ford/Motorcraft products call 1-800-959-3673 in both the USA and Canada while [you should] also reference the MSDS available for the product.