How to service the cruise control servo on 2007 Ford Freestar?

In servicing the cruise control servo, unplug the electrical connector of the actuator and detach the speed control cable before removing the service. Then loosen the two bolts that have the actuator. Installation: To install, the new actuator, tighten the bolts to 10 Nm (89 lb-in) and reverse the installation procedure.

OEM 2007 Ford Freestar Cruise Control Servo

Cruise Control Servo Speed

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Cruise Control Servo found

View related parts
2007 Ford Freestar Cruise Servo Part Number: 6F2Z-9C735-AA
$204.89 MSRP: $283.44
You Save: $78.55 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Servo Assembly - Speed Control; Cruise Control Servo; Servo
- Replaces: 4F2Z-9C735-AA
- Base No.: 9C735
- Item Weight: 2.70 Pounds
- Item Dimensions: 8.2 x 5.9 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F2Z-9C735-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS

2007 Ford Freestar Cruise Control Servo

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Freestar Cruise Control Servo available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Freestar Cruise Control Servo as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Freestar Cruise Control Servo Parts Q&A

Q: How to service the cruise control servo on 2007 Ford Freestar?
A: In servicing the cruise control servo, unplug the electrical connector of the actuator and detach the speed control cable before removing the service. Then loosen the two bolts that have the actuator. Installation: To install, the new actuator, tighten the bolts to 10 Nm (89 lb-in) and reverse the installation procedure.