FordParts
My Garage
My Account
Cart
OEM 2007 Ford Freestyle A/C Accumulator
Accumulator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 A/C Accumulators found
2007 Ford Freestyle Dehydrator Part Number: 7F9Z-19C836-BA
$54.12 MSRP: $73.65You Save: $19.53 (27%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Kit; A/C Receiver Drier; Drier Desiccant Element; A/C Accumulator; Accumulator; Drier
- Replaces: 6F9Z-19959-BA, 5F9Z-19959-BA
- Base No.: 19C836
- Item Weight: 2.20 Pounds
- Item Dimensions: 16.3 x 4.6 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7F9Z-19C836-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Freestyle Dehydrator Part Number: 7F9Z-19C836-AA
$50.08 MSRP: $68.15You Save: $18.07 (27%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Kit; A/C Receiver Drier; Drier Desiccant Element; A/C Accumulator; Accumulator; Drier
- Replaces: 6F9Z-19959-CA
- Base No.: 19C836
- Item Weight: 2.10 Pounds
- Item Dimensions: 16.3 x 4.5 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7F9Z-19C836-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Freestyle A/C Accumulator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Freestyle A/C Accumulator available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Freestyle A/C Accumulator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Freestyle A/C Accumulator Parts Q&A
- Q: How to service the A/C Accumulator on 2007 Ford Freestyle?A: Service of the A/C accumulator requires first recovering refrigerant and placing the vehicle on the hoist in neutral gear. You should unfasten both A/C accumulator bracket bolts though reinstallation requires you to secure them at 9 Nm (80 lb-in). After removing the fitting nut and discarding the O-ring seal from the condenser outlet connection, it is necessary to install the new fitting with torque at 8 Nm (71 lb-in) during assembly. Removal of the A/C accumulator outlet fitting nut enables you to disconnect the fitting along with the discard of its O-ring seal prior to tightening the new fitting to 8 Nm (71 lb-in). Follow the reverse steps of removal to install the A/C accumulator unit while using new O-ring seals and applying the appropriate clean PAG oil amount to the system. Complete the process by evacuating, running leak tests, and charging the refrigerant system wires.