FordParts
My Garage
My Account
Cart
OEM 2007 Ford Freestyle Brake Caliper
Caliper- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Brake Calipers found
2007 Ford Freestyle Caliper, Front Driver Side Part Number: 5F9Z-2B121-BA
$85.58 MSRP: $118.39You Save: $32.81 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Front Driver Side
- Base No.: 2B120
- Item Weight: 6.30 Pounds
- Item Dimensions: 4.8 x 7.2 x 9.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-2B121-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Freestyle Caliper, Front Passenger Side Part Number: 5F9Z-2B120-BA
$85.58 MSRP: $118.39You Save: $32.81 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Front Passenger Side
- Base No.: 2B120
- Item Weight: 6.60 Pounds
- Item Dimensions: 5.0 x 7.4 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-2B120-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Caliper Assembly - Brake; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Rear Passenger Side
- Replaced by: 6F9Z-2552-A
- Base No.: 2552
- Item Weight: 5.80 Pounds
- Item Dimensions: 7.8 x 7.2 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F9Z-2552-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Caliper Assembly - Brake; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Rear Driver Side
- Replaced by: 6F9Z-2553-A
- Base No.: 2552
- Item Weight: 6.10 Pounds
- Item Dimensions: 7.7 x 4.7 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F9Z-2553-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Freestyle Brake Caliper
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Freestyle Brake Caliper available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Freestyle Brake Caliper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Freestyle Brake Caliper Parts Q&A
- Q: How to service and repair the front brake caliper on 2007 Ford Freestyle?A: The front brake caliper service starts by taking off brake pads while removing the brake caliper flow bolt before setting aside the brake hose together with discarding the copper washers. Next, remove the brake caliper. You should use brake parts cleaner on the brake caliper-to-brake pad surfaces and remove all remaining adhesive while making sure the brake pad lining stays free from oil grease and fluid and brake fluid because contaminated pads must not go on. The brake pad installation requires all new hardware from the kit including spring clips and brake pads that should be fitted to the brake caliper anchor plate. Install the brake caliper flow bolt together with new copper washers while tightening it to 30 Nm (22 lb-ft). Proper seating of caliper pin boots prevents guide pin damage while preventing brake hose distortion when installing the brake caliper on the anchor plate. Fasten the two caliper guide pin bolts by tightening them to 60 Nm (44 lb-ft). After bleaching the brakes you should maintain engine operation while pushing down on the brake pedal at 89-133 N (20-30 lb) of pressure during one minute to achieve proper brake pad adherence. Testing of the brakes must be performed to ensure proper operation.