FordParts
My Garage
My Account
Cart
OEM 2007 Ford Freestyle PCV Valve
Position Crank Ventilation Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 PCV Valves found
2007 Ford Freestyle PCV Valve Part Number: 5R3Z-6A666-BA
$144.27 MSRP: $229.09You Save: $84.82 (38%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Valve Assembly - Crankcase Ventilation; Crankcase Vent Valve
- Base No.: 6A666
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 13.8 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-6A666-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Freestyle PCV Valve Part Number: KR3Z-6A666-B
$13.63 MSRP: $21.09You Save: $7.46 (36%)Ships in 1 Business DayProduct Specifications- Other Name: Valve Assembly; Crankcase Vent Valve
- Replaces: 4L5Z-6A666-AA, EV-267
- Condition: New
- Fitment Type: Direct Replacement
- SKU: KR3Z-6A666-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Freestyle PCV Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Freestyle PCV Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Freestyle PCV Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Freestyle PCV Valve Parts Q&A
- Q: How to Service the PCV Valve on 2007 Ford Freestyle?A: The Positive Crankcase Ventilation (PCV) valve requires service where technicians should remove four bolts from the transaxle roll restrictor brace while wire brushing the bolts before applying threadlock to their threads and tightening them to 55 Nm (41 lb-ft) upon replacement. During assembly the bolt should be joined with the transaxle roll restrictor brace before cleaning each bolt then treating them with threadlock before tightening them to 48 Nm (35 lb-ft). The PCV valve tube requires removal from its valve position along with removing any electrical connector present on the PCV valve. A fresh PCV valve should be installed when the original was removed from the cam cover because any harm to the locking mechanism will arise. You should rotate the PCV valve counterclockwise from its position on the valve cover for removal but perform the opposite steps to reinstall it.