My Garage
Cart

OEM 2007 Ford Freestyle Wiper Switch

Windshield Wiper Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Switch found

  • 2007 Ford Freestyle Wiper Switch - 5F9Z-17A553-AAA
    2007 Ford Freestyle Wiper Switch Diagram - 5F9Z-17A553-AAA
    View related parts
    Product Specifications
    • Other Name: Switch Assembly; Windshield Wiper Switch; Windshield Washer Switch
    • Base No.: 17A553
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 9.6 x 2.8 x 4.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5F9Z-17A553-AAA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Ford Freestyle Submodels:
    • Limited, SE, SEL | 6 Cyl 3.0 L GAS

2007 Ford Freestyle Wiper Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Freestyle Wiper Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Freestyle Wiper Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Freestyle Wiper Switch Parts Q&A

  • Q: How to Service and Repair a Wiper Switch on a Steering Column on 2007 Ford Freestyle?
    A: Service and repair of the wiper switch starts with taking out the steering wheel. To access the upper steering column shroud, users should apply pressure on both its sides until removal becomes possible. Begin by removing the steering wheel, followed by taking off the upper steering column shroud by pressing its sides inward. Then proceed to remove the three screws securing the steering column cover and continue by taking off the cover. Unfasten the lower steering column shroud by removing its three screws, then separate it from its position. The service and repair of the wiper switch requires disconnecting three electrical connectors, followed by removing the four screws that secure the multi-function switch. The final stage requires you to execute the opposite steps that were used during uninstallation.