FordParts
My Garage
My Account
Cart
OEM 2007 Ford Fusion Shift Cable
Transmission Shift Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Shift Cables found
2007 Ford Fusion Shift Control Cable Part Number: AE5Z-7E395-G
$91.94 MSRP: $133.83You Save: $41.89 (32%)Product Specifications- Other Name: Cable Assembly - Selector Lever Control; Automatic Transmission Shifter Cable; Cable
- Replaces: 6E5Z-7E395-EA, AE5Z-7E395-E
- Base No.: 7E395
- Item Weight: 2.10 Pounds
- Item Dimensions: 18.9 x 14.7 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AE5Z-7E395-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Fusion Shift Control Cable Part Number: 6E5Z-7E395-D
$121.67 MSRP: $177.10You Save: $55.43 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Cable Assembly - Selector Lever Control
- Replaces: 6E5Z-7E395-B
- Base No.: 7E395
- Item Weight: 5.20 Pounds
- Item Dimensions: 32.6 x 9.7 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-7E395-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Fusion Shift Control Cable Part Number: 6E5Z-7E395-E
Product Specifications- Other Name: Cable Assembly - Selector Lever Control; Automatic Transmission Shifter Cable; Cable
- Replaces: 6E5Z-7E395-A
- Base No.: 7E395
- Item Weight: 2.70 Pounds
- Item Dimensions: 17.5 x 17.3 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-7E395-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Fusion Shift Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Fusion Shift Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Fusion Shift Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Fusion Shift Cable Parts Q&A
- Q: How to Service and Repair a Shift Cable on 2007 Ford Fusion?A: The repair process for gearshift cables requires the removal of heater core and evaporator core housing along with battery and battery tray. Clear the spring clip from the cables without damaging it before you remove the gearshift cables from the shift mechanism so you can pull the spring clip out while rotating it 90 degrees upward. The process demands gentle prying of the shift cable retainer while the cables must be disengaged from the transaxle bracket. First remove the clamp nut and gearshift cable clamp then extract the restraint control module (RCM) before positioning the insulation blanket to the side. Releasing the floor from the two gearshift cable nuts allows the cables to become free. The cable nuts need to be tightened to 8 Nm (71 inch lbs.) during reinstallation. Caution must be taken during cable removal from the shift lever assembly to protect retainer hardware before extracting the shift cables through the bulkhead to reach the interior. Put the grommet in with the arrow facing upward when placing cables through the dash panel for installation and follow the removal steps backwards when performing gearshift cable adjustments.
Related 2007 Ford Fusion Parts
2007 Ford Fusion Clutch Master Cylinder
2007 Ford Fusion Flywheel
2007 Ford Fusion Transfer Case
2007 Ford Fusion Automatic Transmission Shift Levers
2007 Ford Fusion Automatic Transmission Shifter
2007 Ford Fusion Clutch Disc
2007 Ford Fusion Clutch Fork
2007 Ford Fusion Clutch Hose
2007 Ford Fusion Clutch Hydraulic Lines
2007 Ford Fusion Clutch Slave Cylinder
2007 Ford Fusion Release Bearing
2007 Ford Fusion Transmission Assembly