How to service the sunroof or moonroof panel on 2007 Ford Fusion?

Service of sunroof or moonroof panels requires first opening the roof opening panel to position VENT. Start by dismantling the roof opening panel glass using the four securing screws which become accessible after unclipping and setting aside the top part of the concertina blind. After installing the glass on the roof opening panel users must tighten all screws to 6 Nm (53 lb-in) and verify that the glass is perfectly centered and aligned before fastening the screws. Follow the exact opposite steps needed for uninstallation to reassemble the system.

OEM 2007 Ford Fusion Sunroof

Moonroof

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Sunroof found

View related parts
2007 Ford Fusion Sunroof Glass Part Number: 6E5Z-54500A18-A
$358.89 MSRP: $527.00
You Save: $168.11 (32%)
Product Specifications
- Other Name: Glass
- Manufacturer Note: Includes Seal
- Replaced by: 9E5Z-54500A18-A
- Base No.: <500A18
- Item Weight: 27.00 Pounds
- Item Dimensions: 38.8 x 24.7 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-54500A18-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Fusion Submodels:
- S, SE, SEL | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2007 Ford Fusion Sunroof

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Fusion Sunroof available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Fusion Sunroof as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Fusion Sunroof Parts Q&A

Q: How to service the sunroof or moonroof panel on 2007 Ford Fusion?
A: Service of sunroof or moonroof panels requires first opening the roof opening panel to position VENT. Start by dismantling the roof opening panel glass using the four securing screws which become accessible after unclipping and setting aside the top part of the concertina blind. After installing the glass on the roof opening panel users must tighten all screws to 6 Nm (53 lb-in) and verify that the glass is perfectly centered and aligned before fastening the screws. Follow the exact opposite steps needed for uninstallation to reassemble the system.