How to service the Sunroof glass on 2008 Ford Fusion?

Start the service of roof opening panel glass by setting the panel to VENT position. The glass requires removal with four screws through the unclipping of the top concertina blind parts which should be placed aside. Secure the roof opening panel glass by tightening its screws to 6 Nm (53 lb-in) then check that the panel remains centered before completing screw installation. You can finish the installation of the roof opening panel by running an initialization sequence of the motor.

OEM 2008 Ford Fusion Sunroof

Moonroof

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Sunroof found

View related parts
2008 Ford Fusion Sunroof Glass Part Number: 6E5Z-54500A18-A
$358.89 MSRP: $527.00
You Save: $168.11 (32%)
Product Specifications
- Other Name: Glass
- Manufacturer Note: Includes Seal
- Replaced by: 9E5Z-54500A18-A
- Base No.: <500A18
- Item Weight: 27.00 Pounds
- Item Dimensions: 38.8 x 24.7 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-54500A18-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Fusion Submodels:
- S, SE, SEL | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2008 Ford Fusion Sunroof

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Fusion Sunroof available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Fusion Sunroof as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Fusion Sunroof Parts Q&A

Q: How to service the Sunroof glass on 2008 Ford Fusion?
A: Start the service of roof opening panel glass by setting the panel to VENT position. The glass requires removal with four screws through the unclipping of the top concertina blind parts which should be placed aside. Secure the roof opening panel glass by tightening its screws to 6 Nm (53 lb-in) then check that the panel remains centered before completing screw installation. You can finish the installation of the roof opening panel by running an initialization sequence of the motor.