How to service and repair the steering wheel on 2007 Ford Mustang?

Service or repair of the steering wheel begins when the wheel faces front center and the ignition switch shows OFF. Remove the driver air bag module as the first step. Take care when you remove steering wheel spoke finish panel(s) because you should avoid using tools that might damage the steering wheel. You should use your fingers to carefully raise the wheel spoke base. Steering wheel spoke finish panels are mountable independently when been serviced and the wheel does not need to be uninstalled for this task. Move ahead with the removal of steering wheel spoke finish panel(s) only if required. After bolt removal of the steering wheel discard the screw which needs to be tightened at 55 Nm (41 ft. lbs) at the end of installation. You should take out the steering wheel while directing the Clock Spring connectors through its frame. The installation process will be done by performing the removal steps in reverse.

OEM 2007 Ford Mustang Steering Wheel

Navigation Steering Wheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Steering Wheels found

View related parts
2007 Ford Mustang Steering Wheel Part Number: 6R3Z-3600-CAA
$423.77 MSRP: $586.25
You Save: $162.48 (28%)
Ships in 1-2 Business Days

Out of Stock
Product Specifications
- Other Name: Wheel Assembly - Steering
- Replaces: 4R3Z-3600-CAA, 6R3Z-3600-CA, 5R3Z-3600-CA
- Base No.: 3600
- Item Weight: 5.70 Pounds
- Item Dimensions: 18.9 x 18.2 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6R3Z-3600-CAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Mustang Steering Wheel Part Number: 6R3Z-3600-BA
Product Specifications
- Other Name: Wheel Assembly - Steering
- Base No.: 3600
- Item Weight: 8.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6R3Z-3600-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base, GT, Shelby GT, Shelby GT500 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Mustang Steering Wheel Part Number: 7R3Z-3600-AA
$712.80 MSRP: $1056.00
You Save: $343.20 (33%)
Product Specifications
- Other Name: Wheel Assembly - Steering
- Base No.: 3600
- Item Weight: 8.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-3600-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Bullitt, Shelby GT, Shelby GT500, Shelby GT500KR | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2007 Ford Mustang Steering Wheel

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Mustang Steering Wheel available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Mustang Steering Wheel as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Mustang Steering Wheel Parts Q&A

Q: How to service and repair the steering wheel on 2007 Ford Mustang?
A: Service or repair of the steering wheel begins when the wheel faces front center and the ignition switch shows OFF. Remove the driver air bag module as the first step. Take care when you remove steering wheel spoke finish panel(s) because you should avoid using tools that might damage the steering wheel. You should use your fingers to carefully raise the wheel spoke base. Steering wheel spoke finish panels are mountable independently when been serviced and the wheel does not need to be uninstalled for this task. Move ahead with the removal of steering wheel spoke finish panel(s) only if required. After bolt removal of the steering wheel discard the screw which needs to be tightened at 55 Nm (41 ft. lbs) at the end of installation. You should take out the steering wheel while directing the Clock Spring connectors through its frame. The installation process will be done by performing the removal steps in reverse.