How to service and repair the throttle cable and linkage on 2007 Ford Ranger?

The servicing and repairing process of throttle cable and linkage begins with removing bolts securing the accelerator control splash shield and tightening them to 3 Nm (27 lb-in) before refitting them. You should first disconnect the accelerator cable from the throttle lever before depressing the tabs to pull out the accelerator cable from the intake manifold. The accelerator cable becomes detached from accelerator pedal and shaft by first removing its connections to both parts before fully extracting it with tab depression. The installation process ends with the same steps used for removal.

OEM 2007 Ford Ranger Throttle Cable

Accelerator Throttle Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Throttle Cables found

View related parts
2007 Ford Ranger Throttle Cable Part Number: 6L5Z-9A758-A
$28.46 MSRP: $52.89
You Save: $24.43 (47%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Throttle Control; Cruise Control Cable; Cable Assembly
- Replaces: 3L5Z-9A758-BA
- Base No.: 9A758
- Item Weight: 0.70 Pounds
- Item Dimensions: 9.1 x 3.0 x 14.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-9A758-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2007 Ford Ranger Throttle Cable Part Number: 2L5Z-9A758-CA
Product Specifications
- Other Name: Cable Assembly - Throttle Control; Cruise Control Cable; Cable Assembly
- Replaces: 1L2Z-9A758-GA
- Base No.: 9A758
- Item Weight: 1.20 Pounds
- Item Dimensions: 15.3 x 10.8 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L5Z-9A758-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
2007 Ford Ranger Throttle Cable Part Number: 4L5Z-9A758-AA
Product Specifications
- Other Name: Cable Assembly - Throttle Control
- Replaces: 2L5Z-9A758-AA
- Base No.: 9A758
- Item Weight: 1.20 Pounds
- Item Dimensions: 15.3 x 14.7 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-9A758-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Edge, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2007 Ford Ranger Throttle Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Ranger Throttle Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Ranger Throttle Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Ranger Throttle Cable Parts Q&A

Q: How to service and repair the throttle cable and linkage on 2007 Ford Ranger?
A: The servicing and repairing process of throttle cable and linkage begins with removing bolts securing the accelerator control splash shield and tightening them to 3 Nm (27 lb-in) before refitting them. You should first disconnect the accelerator cable from the throttle lever before depressing the tabs to pull out the accelerator cable from the intake manifold. The accelerator cable becomes detached from accelerator pedal and shaft by first removing its connections to both parts before fully extracting it with tab depression. The installation process ends with the same steps used for removal.