OEM 2007 Ford Taurus Brake Pads

2007 Ford Taurus Brake Pads Parts Q&A

• Q: How to service and repair brake pads safely and effectively on 2007 Ford Taurus?

  A: The servicing and repair of brake pads must start with brake fluid usage that strictly follows DOT 3 standards because alternative fluids will cause permanent damage to brake parts and make brakes non-functional. When handling brake fluid maintain safety by keeping away from the eyes and wash all contact areas thoroughly. Eyes require immediate attention if fluid exposure occurs. The affected eyes need extended water flush for 15 minutes while seeking medical care when irritation persists. After drinking water, vomiting should be induced followed by immediate medical assistance. If brake fluid escapes it will damage painted and plastic surfaces so quick water washing must clean up the spillage. Visible fluid should be drained from the brake master cylinder reservoir to reach the halfway point during the inspection. Keep the vehicle positioned on a hoist in neutral position before trying to retract the piston through the brake caliper sight hole because it could damage the brake caliper. The brake caliper must never be suspended by the brake hose because mechanic's wire should be used for suspension purposes. Secure the caliper after removing its bolts. Worn brake pads that exceed the steel backing plate limit require complete axle replacement after examining brake components and discarding them when affected by contaminants. A new front brake disc needs installation when brake disc thickness measurement results in unsatisfactory numbers. Before pad installation check that all contact between the pad lining material remains free from contamination by brake fluid, oil and grease and other foreign materials. Employ an appropriate tool to protect caliper pistons through the bores while running the caliper pistons into their bores using compressed air. The brake caliper should be placed correctly before installing caliper bolts while tightening them to 35 Nm (26 ft. lbs.). The brake pedal needs several pump movements followed by brake lining positioning before the brake fluid reservoir gets filled with new fluid to verify normal brake operations.