How to service and repair the brake backing plate in the drum brake system on 2007 Ford Taurus?

The process for fixing or servicing the drum brake backing plate begins with brake drum removal. The service starts by removing the parking brake cable from the parking brake lever before removing the wheel cylinder. Loosen the parking brake cable together with conduit from the brake backing plate before guiding them away from the backing plate. The wheel speed sensor bolt should be removed while practicing a 9 Nm (80 inch lbs.) torque procedure to maintain standardized reattachment. Extract the wheel speed sensor from the backing plate before discarding the four backing plate bolts which must be replaced with new ones during installation and secured at 70 Nm (52 ft. lbs.). The installation should end by performing the steps in reverse order to the removal steps.

OEM 2007 Ford Taurus Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Backing Plates found

View related parts
2007 Ford Taurus Backing Plate, Front Driver Side Part Number: 4F1Z-2K005-AA
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Left; Splash Shield; Brake Dust Shield
- Manufacturer Note: L.H., Triangle cutout
- Position: Front Driver Side
- Replaces: F5OY-2K005-A
- Base No.: 2K005
- Item Weight: 1.30 Pounds
- Item Dimensions: 11.1 x 9.5 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-2K005-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Taurus Submodels:
- G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
2007 Ford Taurus Backing Plate, Front Passenger Side Part Number: 4F1Z-2K004-AA
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Splash Shield; Brake Dust Shield
- Manufacturer Note: R.H., Triangle cutout
- Position: Front Passenger Side
- Replaces: F5OY-2K004-A
- Base No.: 2K004
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-2K004-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Taurus Submodels:
- G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
2007 Ford Taurus Backing Plate, Rear Part Number: F3DZ-2C028-A
Product Specifications
- Other Name: Shield - Brake Disc Splash; Brake Dust Shield, Rear; Splash Shield; Brake Dust Shield
- Position: Rear
- Base No.: 2C028
- Item Weight: 1.40 Pounds
- Item Dimensions: 4.2 x 12.6 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: F3DZ-2C028-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Taurus Submodels:
- GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 3.4 L GAS

2007 Ford Taurus Brake Backing Plate

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Taurus Brake Backing Plate available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Taurus Brake Backing Plate as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Taurus Brake Backing Plate Parts Q&A

Q: How to service and repair the brake backing plate in the drum brake system on 2007 Ford Taurus?
A: The process for fixing or servicing the drum brake backing plate begins with brake drum removal. The service starts by removing the parking brake cable from the parking brake lever before removing the wheel cylinder. Loosen the parking brake cable together with conduit from the brake backing plate before guiding them away from the backing plate. The wheel speed sensor bolt should be removed while practicing a 9 Nm (80 inch lbs.) torque procedure to maintain standardized reattachment. Extract the wheel speed sensor from the backing plate before discarding the four backing plate bolts which must be replaced with new ones during installation and secured at 70 Nm (52 ft. lbs.). The installation should end by performing the steps in reverse order to the removal steps.