My Garage
Cart

OEM 2007 Lincoln Town Car Axle Shaft

Car Axle Shaft
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Axle Shafts found

  • 2007 Lincoln Town Car Axle Shaft - 3W1Z-4234-A
    2007 Lincoln Town Car Axle Shaft Diagram - 3W1Z-4234-A
    View related parts

    2007 Lincoln Town Car Axle Shaft, Rear Part Number: 3W1Z-4234-A

    $204.88 MSRP: $278.81
    You Save: $73.93 (27%)
    ADD TO CART
    Product Specifications
    • Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear; Axle Shafts
    • Manufacturer Note: 28 Spline
    • Position: Rear
    • Replaces: 3W1Z-4234-KA
    • Base No.: 4234
    • Item Weight: 23.70 Pounds
    • Item Dimensions: 40.4 x 8.7 x 8.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: 3W1Z-4234-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Lincoln Town Car Submodels:
    • Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
  • 2007 Lincoln Town Car Axle Shaft Diagram - 6W1Z-4234-A
    View related parts
    Product Specifications
    • Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear; Axle Shafts
    • Manufacturer Note: 31 Spline
    • Position: Rear
    • Replaces: 5W1Z-4234-A
    • Base No.: 4238
    • Item Weight: 22.60 Pounds
    • Item Dimensions: 41.7 x 8.4 x 8.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: 6W1Z-4234-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Lincoln Town Car Submodels:
    • Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
  • 2007 Lincoln Town Car Axle Shaft Diagram - 6W1Z-4234-B
    View related parts
    Product Specifications
    • Other Name: Shaft Assembly - Rear Axle
    • Manufacturer Note: 31 Spline
    • Position: Rear
    • Base No.: 4234
    • Item Weight: 27.30 Pounds
    • Item Dimensions: 41.6 x 8.4 x 8.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: 6W1Z-4234-B
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Lincoln Town Car Submodels:
    • Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2007 Lincoln Town Car Axle Shaft

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln Town Car Axle Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln Town Car Axle Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Lincoln Town Car Axle Shaft Parts Q&A

  • Q: How Can the Rear Axle Shaft Be Safely Removed and Reinstalled with Rear Air Springs on 2007 Lincoln Town Car?
    A: Owners should disable the power in the air suspension system using the air suspension switch near the left-side luggage compartment before hoisting or jacking efforts to stop unexpected air spring changes. First discard the brake caliper and brake disc from the rear while using mechanic wire to sustain the caliper position followed by sensor bolt removal to place the anti-lock sensor aside. First remove the differential housing cover along with the differential pinion shaft by starting with the lock bolt removal followed by the shaft extraction while maintaining the rubber O-ring in the axle shaft U-washer groove. Insert the axle shaft toward the inside to take out the U-washer after which you should reinstall the differential pinion shaft by moving the axle shaft outward and finger-tightening the lock bolt. Retract the axle shaft but safeguard the wheel bearing oil seal from any harm. Apply lubrication to the oil seal lip before putting in the axle shaft followed by the U-washer that should fit properly into the side gear. You should position the differential pinion shaft through its hole to the lock bolt hole before screwing in a new 30 Nm (22 ft. lbs) tightened lock bolt. Complete the installation procedure by replacing the differential housing cover before torquing the rear brake anti-lock sensor to 7 Nm and reinstalling the rear brake caliper with brake disc.