How to service and repair the wheel hub and wheel bearing on 2007 Lincoln Town Car?

Turn off air suspension power and switch, put vehicle in neutral on hoist. Remove caliper bolts and support it with wire; reinstall and tighten. Remove brake disc and splash shield, disconnect wheel speed sensor, remove hub bolts, route wiring ahead of stabilizer link, ensure connector clicks, then reverse removal.

OEM 2007 Lincoln Town Car Wheel Hub

Wheel Axle Hub

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Hub found

View related parts
2007 Lincoln Town Car Hub & Bearing Part Number: H2MZ-1104-X
$150.28 MSRP: $247.27
You Save: $96.99 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly - Wheel; Wheel Hub Repair Kit; Wheel Hub; Front Hub & Bearing
- Manufacturer Note: High Level Service Design
- Replaces: 5W1Z-1104-AA, 6W1Z-1104-A
- Item Weight: 7.80 Pounds
- Item Dimensions: 10.6 x 10.1 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: H2MZ-1104-X
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Lincoln Town Car Submodels:
- Designer Series, Executive, Executive L, Protection Series, Signature, Signature L, Signature Limited | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2007 Lincoln Town Car Wheel Hub

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln Town Car Wheel Hub available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln Town Car Wheel Hub as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Lincoln Town Car Wheel Hub Parts Q&A

Q: How to service and repair the wheel hub and wheel bearing on 2007 Lincoln Town Car?
A: Turn off air suspension power and switch, put vehicle in neutral on hoist. Remove caliper bolts and support it with wire; reinstall and tighten. Remove brake disc and splash shield, disconnect wheel speed sensor, remove hub bolts, route wiring ahead of stabilizer link, ensure connector clicks, then reverse removal.