FordParts
My Garage
My Account
Cart
OEM 2007 Lincoln Town Car Wiper Arm
Windshield Wiper Arm- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Wiper Arms found
Product Specifications- Other Name: Arm Assembly - Wiper
- Position: Passenger Side
- Replaces: F8VZ-17526-AA
- Base No.: 17526
- Item Weight: 1.30 Pounds
- Item Dimensions: 28.9 x 3.2 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4W1Z-17526-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Arm Assembly - Wiper
- Position: Driver Side
- Replaces: F8VZ-17527-AA
- Base No.: 17527
- Item Weight: 1.00 Pounds
- Item Dimensions: 4.1 x 4.2 x 24.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4W1Z-17527-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Lincoln Town Car Wiper Arm
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln Town Car Wiper Arm available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln Town Car Wiper Arm as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Lincoln Town Car Wiper Arm Parts Q&A
- Q: How to service the Wiper Arm and pivot shaft on 2007 Lincoln Town Car?A: One must start the service process by removing battery power. The wiper mounting and pivot shaft assembly needs its cowl panel grilles removed before releasing all nuts and bolts to set it aside. Separate the electrical connector before unthreading the wiper mounting arm and pivot shaft assembly from its position. The wiper mounting arm and pivot shaft assembly needs to be positioned before connecting the electrical connector. Properly install the nuts and bolts on the wiper mounting arm and pivot shaft assembly while tightening them to 12 Nm (9 lb-ft). Replace the cowl panel grilles while reconnecting the battery and then verify the wiper pivot arm adjustment.